PartsTable
Technical Data Sheet
Download PDF

45052248 — RING,WIPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

45052248: RING,WIPER.

The RING,WIPER is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, ring_style: CONCENTRIC, inside_diameter: 1.29 INCHES NOMINAL IN, outside_diameter: 1.75 INCHES NOMINAL IN, special_features: ITEM IS BLACK HARDNESS:70-80 DUROMETER SHORE A, material_thickness: 0.20 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-641-8617, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
45052248
NSN: 5330-01-641-8617
FSC: 5330 — Packing and Gasket Materials
CAGE: 29899 — CALGON CARBON UV TECHNOLOGIES LLC DBA HYDE MARINE (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
ring_styleCONCENTRIC
inside_diameter1.29 INCHES NOMINAL IN
outside_diameter1.75 INCHES NOMINAL IN
special_featuresITEM IS BLACK HARDNESS:70-80 DUROMETER SHORE A
material_thickness0.20 INCHES NOMINAL IN
end_item_identificationREPLENISHMENT VESSEL
cross-sectional_shape_styleSTRAIGHT FACE, DOUBLE SCRAPER
part_name_assigned_by_controlling_agencyWIPER QUARTZ SLEEVE
NSN5330-01-641-8617
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 45052248 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: STRAIGHT FACE, DOUBLE SCRAPER
•
OUTSIDE DIAMETER: 1.75 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.20 INCHES NOMINAL IN
•
INSIDE DIAMETER: 1.29 INCHES NOMINAL IN
•
RING STYLE: CONCENTRIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL SHAPE STYLESTRAIGHT FACE, DOUBLE SCRAPER
OUTSIDE DIAMETER1.75 INCHES NOMINAL IN
MATERIAL THICKNESS0.20 INCHES NOMINAL IN
INSIDE DIAMETER1.29 INCHES NOMINAL IN
RING STYLECONCENTRIC
SPECIAL FEATURESITEM IS BLACK HARDNESS:70-80 DUROMETER SHORE A
PART NAME ASSIGNED BY CONTROLLING AGENCYWIPER QUARTZ SLEEVE
END ITEM IDENTIFICATIONREPLENISHMENT VESSEL
MATERIALUNABLE TO DECODE
SUBSTITUTES & CROSS-REFERENCES 2
161630Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
G300300Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 45052248?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 45052248?
45052248 is a RING,WIPER.
What parts can replace 45052248?
There are 2 known substitutes for 45052248: 161630, G300300. Substitute compatibility should be verified for your specific system.
What is the NSN for 45052248?
45052248 is cataloged in the U.S. Government catalog under NSN 5330-01-641-8617. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 45052248