PartsTable
Technical Data Sheet
Download PDF

45035-0001 — NUT,SHEET SPRING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

45035-0001: NUT,SHEET SPRING.

The NUT,SHEET SPRING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: SHEET SPRING, nut_width: 0.250 INCHES NOMINAL IN, nut_length: 0.400 INCHES NOMINAL IN, panel_thickness: 0.043 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN, special_features: TOP LEG STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-232-7973, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
45035-0001
NSN: 5310-01-232-7973
FSC: 5310 — Nuts and Washers
CAGE: 27914 — HONEYWELL INTERNATIONAL INC DBA HONEYWELL (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleSHEET SPRING
nut_width0.250 INCHES NOMINAL IN
nut_length0.400 INCHES NOMINAL IN
panel_thickness0.043 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN
special_featuresTOP LEG STRAIGHT
surface_treatmentCADMIUM OVERALL
material_thickness0.012 INCHES NOMINAL IN
mating_member_diameter_accommodated0.112 INCHES NOMINAL IN
NSN5310-01-232-7973
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 45035-0001 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT WIDTH: 0.250 INCHES NOMINAL IN
•
NUT LENGTH: 0.400 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.012 INCHES NOMINAL IN
•
PANEL THICKNESS: 0.043 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN
•
MATING MEMBER DIAMETER ACCOMMODATED: 0.112 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
NUT STYLE: SHEET SPRING
TECHNICAL CHARACTERISTICS
NUT WIDTH0.250 INCHES NOMINAL IN
NUT LENGTH0.400 INCHES NOMINAL IN
MATERIAL THICKNESS0.012 INCHES NOMINAL IN
PANEL THICKNESS0.043 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN
MATING MEMBER DIAMETER ACCOMMODATED0.112 INCHES NOMINAL IN
SPECIAL FEATURESTOP LEG STRAIGHT
SURFACE TREATMENTCADMIUM OVERALL
NUT STYLESHEET SPRING
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
C11374-440-24Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 45035-0001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 45035-0001?
45035-0001 is a NUT,SHEET SPRING.
What parts can replace 45035-0001?
There is 1 known substitute for 45035-0001: C11374-440-24. Substitute compatibility should be verified for your specific system.
What is the NSN for 45035-0001?
45035-0001 is cataloged in the U.S. Government catalog under NSN 5310-01-232-7973. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 45035-0001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.