PartsTable
Technical Data Sheet
PartsTable / O-RING / 450330-1
450330-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BLADE,SCRAPER is a the manufacturer industrial component. Key specifications include special_features: NON-METALLIC/SPARKING; TWO SCRAPING ENDS, part_name_assigned_by_controlling_agency: BLUE ACRYLIC PLASTIC SCRAPER, Form Factor: Blade. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-649-9129, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
450330-1
NSN: 5331-00-649-9129
FSC: 5331 — O-RING
CAGE: 11447 — L3 TECHNOLOGIES, INC. DIV COMMUNICATION SYSTEMS-EAST (USA)
SPECIFICATIONS
special_featuresNON-METALLIC/SPARKING; TWO SCRAPING ENDS
part_name_assigned_by_controlling_agencyBLUE ACRYLIC PLASTIC SCRAPER
Form FactorBlade
NSN5331-00-649-9129
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 450330-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.379 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.062 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.379 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.062 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
V3D10254 ITEM 40CPInterchangeable
interchangeable cross-reference
interchangeable
B180-010Interchangeable
interchangeable cross-reference
interchangeable
0X58-010-15CPInterchangeable
interchangeable cross-reference
interchangeable
740621Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-3533Interchangeable
interchangeable cross-reference
interchangeable
AS 568-010Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 450330-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 450330-1?
450330-1 is a BLADE,SCRAPER.
What parts can replace 450330-1?
There are 27 known substitutes for 450330-1: V3D10254 ITEM 40CP, B180-010, 0X58-010-15CP and 24 more. Substitute compatibility should be verified for your specific system.
Is 450330-1 still available?
450330-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 450330-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026