PartsTable
Technical Data Sheet
Download PDF

45023241-05 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

45023241-05: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include overall_width: 2.125 INCHES MINIMUM IN, aperture_width: 4.062 INCHES MINIMUM AND 4.125 INCHES MAXIMUM IN, overall_length: 19.375 INCHES MINIMUM IN, aperture_length: 21.313 INCHES MINIMUM AND 21.375 INCHES MAXIMUM IN, special_features: FOUR CORNERS STAPLED. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-054-8290, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
45023241-05
NSN: 5330-01-054-8290
FSC: 5330 — Packing and Gasket Materials
CAGE: 80234 — VAPOR CORP SUB OF BRUNSWICK CORP (USA)
SPECIFICATIONS
overall_width2.125 INCHES MINIMUM IN
aperture_width4.062 INCHES MINIMUM AND 4.125 INCHES MAXIMUM IN
overall_length19.375 INCHES MINIMUM IN
aperture_length21.313 INCHES MINIMUM AND 21.375 INCHES MAXIMUM IN
special_featuresFOUR CORNERS STAPLED
NSN5330-01-054-8290
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 45023241-05 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE WIDTH: 4.062 INCHES MINIMUM AND 4.125 INCHES MAXIMUM IN
•
APERTURE LENGTH: 21.313 INCHES MINIMUM AND 21.375 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL LENGTH19.375 INCHES MINIMUM IN
OVERALL WIDTH2.125 INCHES MINIMUM IN
APERTURE WIDTH4.062 INCHES MINIMUM AND 4.125 INCHES MAXIMUM IN
APERTURE LENGTH21.313 INCHES MINIMUM AND 21.375 INCHES MAXIMUM IN
SPECIAL FEATURESFOUR CORNERS STAPLED
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
45023241-15Reference document
Same NSN cross-reference
Reference document — Secondary reference
45023241-5Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 45023241-05?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 45023241-05?
45023241-05 is a GASKET.
What parts can replace 45023241-05?
There are 2 known substitutes for 45023241-05: 45023241-15, 45023241-5. Substitute compatibility should be verified for your specific system.
What is the NSN for 45023241-05?
45023241-05 is cataloged in the U.S. Government catalog under NSN 5330-01-054-8290. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 45023241-05