PartsTable
Technical Data Sheet
Download PDF

450189N — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

450189N: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN, temp_rating: -65.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF, housing_bore_diameter: 1.749 INCHES MINIMUM AND 1.751 INCHES MAXIMUM IN, sealing_element_style: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-876-8561, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
450189N
NSN: 5330-00-876-8561
FSC: 5330 — Packing and Gasket Materials
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
temp_rating-65.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
housing_bore_diameter1.749 INCHES MINIMUM AND 1.751 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.125 INCHES NOMINAL IN
NSN5330-00-876-8561
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 450189N MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 1.749 INCHES MINIMUM AND 1.751 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.125 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
SEAL WIDTH0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER1.749 INCHES MINIMUM AND 1.751 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.125 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 2
10875107Reference document
Same NSN cross-reference
Reference document — Secondary reference
5330008768561Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 450189N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 450189N?
450189N is a SEAL,PLAIN ENCASED.
What parts can replace 450189N?
There are 2 known substitutes for 450189N: 10875107, 5330008768561. Substitute compatibility should be verified for your specific system.
What is the NSN for 450189N?
450189N is cataloged in the U.S. Government catalog under NSN 5330-00-876-8561. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 450189N