PartsTable
Technical Data Sheet
450144 ✓ Verified by PartsTable
Zebra · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEMICONDUCTOR DEVICE,DIODE is a Zebra industrial component. Key specifications include flow_angle: 90.0 DEGREES, leg_length: 1.812 INCHES NOMINAL SECOND END IN, connection_type: THREADED EXTERNAL PIPE FIRST END, connection_style: PLAIN (PIPE) FIRST END, nominal_thread_size: 0.250 INCHES FIRST END IN, thread_series_designator: NPTF FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-999-0624, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
450144
NSN: 5330-00-999-0624
FSC: 5330
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
flow_angle90.0 DEGREES
leg_length1.812 INCHES NOMINAL SECOND END IN
connection_typeTHREADED EXTERNAL PIPE FIRST END
connection_stylePLAIN (PIPE) FIRST END
nominal_thread_size0.250 INCHES FIRST END IN
thread_series_designatorNPTF FIRST END
nominal_inside_diameter_hose_accommodated0.250 INCHES FIRST END IN
NSN5330-00-999-0624
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 450144 MFR: Zebra ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CASE STYLE: SQUARE
ACCOMMODATED SHAFT DIAMETER: 1.437 INCHES NOMINAL IN
HOUSING BORE DIAMETER: 2.502 INCHES NOMINAL IN
SEAL WIDTH: 0.500 INCHES NOMINAL IN
MATERIAL: STEEL CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.437 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.502 INCHES NOMINAL IN
SEAL WIDTH0.500 INCHES NOMINAL IN
MATERIALSTEEL CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
5145Interchangeable
interchangeable cross-reference
interchangeable
1551F11Interchangeable
interchangeable cross-reference
interchangeable
1551F11-2Interchangeable
interchangeable cross-reference
interchangeable
RD11-32INPIL0TInterchangeable
interchangeable cross-reference
interchangeable
AS35411Interchangeable
interchangeable cross-reference
interchangeable
1692Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 450144?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 450144?
450144 is a SEMICONDUCTOR DEVICE,DIODE manufactured by Zebra.
What parts can replace 450144?
There are 19 known substitutes for 450144: 5145, 1551F11, 1551F11-2 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 450144?
450144 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-999-0624. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 450144