PartsTable
Technical Data Sheet
Download PDF

4501-10-08-FG — ELBOW,PIPE TO HOSE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

4501-10-08-FG: ELBOW,PIPE TO HOSE.

The ELBOW,PIPE TO HOSE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, flow_angle: 90.0 DEGREES, leg_length: 2.055 INCHES NOMINAL SECOND END IN, connection_type: THREADED EXTERNAL PIPE FIRST END, connection_style: BEADED (HOSE) SECOND END, style_designator: ELBOW. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-695-8204, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4501-10-08-FG
NSN: 4730-01-695-8204
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 5E240 — BRENNAN INDUSTRIES (USA)
SPECIFICATIONS
materialSTEEL OVERALL
flow_angle90.0 DEGREES
leg_length2.055 INCHES NOMINAL SECOND END IN
connection_typeTHREADED EXTERNAL PIPE FIRST END
connection_styleBEADED (HOSE) SECOND END
style_designatorELBOW
nominal_thread_size0.500 INCHES FIRST END IN
media_for_which_designedFLUID SINGLE RESPONSE
thread_quantity_per_inch14 FIRST END
thread_series_designatorNPTF FIRST END
nominal_width_across_flats0.875 INCHES CENTER BULKHEAD IN
nominal_pipe_size_accommodated0.500 INCHES FIRST END IN
NSN4730-01-695-8204
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 4501-10-08-FG · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL WIDTH ACROSS FLATS: 0.875 INCHES CENTER BULKHEAD IN
•
FLOW ANGLE: 90.0 DEGREES
•
NOMINAL PIPE SIZE ACCOMMODATED: 0.500 INCHES FIRST END IN
•
CONNECTION STYLE: INVERTED FLARE (PIPE) FIRST END
•
CONNECTION TYPE: UNTHREADED EXTERNAL HOSE SECOND END
•
STYLE DESIGNATOR: ELBOW
TECHNICAL CHARACTERISTICS
NOMINAL WIDTH ACROSS FLATS0.875 INCHES CENTER BULKHEAD IN
FLOW ANGLE90.0 DEGREES
NOMINAL PIPE SIZE ACCOMMODATED0.500 INCHES FIRST END IN
CONNECTION STYLEINVERTED FLARE (PIPE) FIRST END
CONNECTION STYLEBEADED (HOSE) SECOND END
CONNECTION TYPEUNTHREADED EXTERNAL HOSE SECOND END
CONNECTION TYPETHREADED EXTERNAL PIPE FIRST END
STYLE DESIGNATORELBOW
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.625 INCHES SECOND END IN
LEG LENGTH1.470 INCHES NOMINAL FIRST END IN
SUBSTITUTES & CROSS-REFERENCES 1
4501-10-08Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4501-10-08-FG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4501-10-08-FG?
4501-10-08-FG is a ELBOW,PIPE TO HOSE.
What parts can replace 4501-10-08-FG?
There is 1 known substitute for 4501-10-08-FG: 4501-10-08. Substitute compatibility should be verified for your specific system.
What is the NSN for 4501-10-08-FG?
4501-10-08-FG is cataloged in the U.S. Government catalog under NSN 4730-01-695-8204. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4501-10-08-FG