PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 45000-251-01
45000-251-01 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN, material: STEEL BAND, overall_width: 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-514-2726, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
45000-251-01
NSN: 5340-00-514-2726
FSC: 5340
CAGE: 31245 — TEREX USA, LLC DBA TEREX EQUIPMENT SERVICES (USA)
SPECIFICATIONS
diameter0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
materialSTEEL BAND
overall_width0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCADMIUM BAND
material_thickness0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
loop_inside_diameter0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end0.827 INCHES MINIMUM AND 0.859 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.577 INCHES MINIMUM AND 0.609 INCHES MAXIMUM IN
NSN5340-00-514-2726
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 45000-251-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES BAND
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1012 BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.688 INCHES NOMINAL IN
•
DIAMETER: 0.281 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM BAND
•
STYLE DESIGNATOR: SINGLE LOOP
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES BAND
MATERIALSTEEL COMP 1010 OR STEEL COMP 1012 BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.688 INCHES NOMINAL IN
DIAMETER0.281 INCHES NOMINAL IN
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM BAND
OVERALL WIDTH0.625 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
DISTANCE FROM LOOP CENTER TO TONGUE END1.000 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
60-1695Upgraded Successor
successor cross-reference
successor
11-260Upgraded Successor
successor cross-reference
successor
2429Upgraded Successor
successor cross-reference
successor
E1811YPC1Interchangeable
interchangeable cross-reference
interchangeable
29616Interchangeable
interchangeable cross-reference
interchangeable
5142726Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 45000-251-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 45000-251-01?
45000-251-01 is a CLAMP,LOOP.
What parts can replace 45000-251-01?
There are 17 known substitutes for 45000-251-01: 60-1695, 11-260, 2429 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 45000-251-01?
45000-251-01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-514-2726. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 45000-251-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026