PartsTable
Technical Data Sheet
Download PDF

4500-10F548PC24 — NUT,PLAIN,SLOTTED,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

4500-10F548PC24: NUT,PLAIN,SLOTTED,HEXAGON.

The NUT,PLAIN,SLOTTED,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1115 OVERALL, nut_style: SLOTTED, HEXAGON, nut_height: 0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-264-1300, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4500-10F548PC24
NSN: 5310-00-264-1300
FSC: 5310 — Nuts and Washers
CAGE: 44114 — BAE SYSTEMS LAND & ARMAMENTS L.P. (USA)
SPECIFICATIONS
materialSTEEL COMP 1115 OVERALL
nut_styleSLOTTED, HEXAGON
nut_height0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
width_across_flats0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
nominal_thread_size0.500 INCHES IN
bearing_surface_typeWASHER FACED
thread_quantity_per_inch13
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-264-1300
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4500-10F548PC24 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
NUT HEIGHT: 0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM IN
•
NUT STYLE: SLOTTED, HEXAGON
•
THREAD CLASS: 3B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
NUT HEIGHT0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM IN
NUT STYLESLOTTED, HEXAGON
THREAD CLASS3B
THREAD QUANTITY PER INCH13
MATERIALSTEEL COMP 1115 OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
56461Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
4500-10F548 PIEReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
4500-10F548 PIECE 24Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4500-10F548PC24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4500-10F548PC24?
4500-10F548PC24 is a NUT,PLAIN,SLOTTED,HEXAGON.
What parts can replace 4500-10F548PC24?
There are 3 known substitutes for 4500-10F548PC24: 56461, 4500-10F548 PIE, 4500-10F548 PIECE 24. Substitute compatibility should be verified for your specific system.
What is the NSN for 4500-10F548PC24?
4500-10F548PC24 is cataloged in the U.S. Government catalog under NSN 5310-00-264-1300. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4500-10F548PC24

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.