PartsTable
Technical Data Sheet
PartsTable / STORAGE_HDD / 450-32
450-32 ✓ Verified by PartsTable
— · STORAGE_HDD · 3.5_SATA_HDD
WHAT YOU NEED TO KNOW
SAS backplane supports SATA, not vice versa NL-SAS = SAS protocol at nearline (7.2K) speed — NOT SATA
Gen8 LFF tray ≠ Gen10 tray — different screw holes
PRODUCT OVERVIEW

PRINTER,AUTOMATIC DATA PROCESSIN. Key specifications include color: RED, material: STEEL, face_width: 0.750 INCHES NOMINAL IN, hole_diameter: 0.250 INCHES NOMINAL IN, overall_depth: 27.750 INCHES NOMINAL IN, overall_width: 45.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-054-4113, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ 450-32
NSN: 5315-00-054-4113
FSC: 5315
CAGE: 02769 — LOCKHEED MARTIN CORPORATION DIV RMS (USA)
SPECIFICATIONS
colorRED
materialSTEEL
face_width0.750 INCHES NOMINAL IN
hole_diameter0.250 INCHES NOMINAL IN
overall_depth27.750 INCHES NOMINAL IN
overall_width45.000 INCHES NOMINAL IN
overall_height39.000 INCHES NOMINAL IN
drawer_quantity6
first_end_styleCHAMFERED
helix_directionLEFT-HAND
shoulder_height0.130 INCHES NOMINAL IN
outside_diameter1.250 INCHES NOMINAL IN
NSN5315-00-054-4113
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K 450-32 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN 450-32 MFR OEM
KEY FEATURES
•
PIN OVERALL LENGTH: 0.488 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL COMP 303 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER LENGTH: 0.010 INCHES NOMINAL IN
•
PIN OVERALL DIAMETER: 0.0917 INCHES MINIMUM AND 0.0937 INCHES MAXIMUM IN
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL LENGTH0.488 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER LENGTH0.010 INCHES NOMINAL IN
PIN OVERALL DIAMETER0.0917 INCHES MINIMUM AND 0.0937 INCHES MAXIMUM IN
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
45032Interchangeable
interchangeable cross-reference
interchangeable
301-39Interchangeable
interchangeable cross-reference
interchangeable
40152Interchangeable
interchangeable cross-reference
interchangeable
58-10037Interchangeable
interchangeable cross-reference
interchangeable
05210530-049110Interchangeable
interchangeable cross-reference
interchangeable
49-110SInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 450-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 450-32?
450-32 is a PRINTER,AUTOMATIC DATA PROCESSIN. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace 450-32?
There are 9 known substitutes for 450-32: 45032, 301-39, 40152 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 450-32?
450-32 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-054-4113. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 450-32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026