45-5002M 7/8 IN. SHAFT — Technical Data Sheet

✓ Verified by PartsTable

— · MRO · MRO_GENERAL

WHAT YOU NEED TO KNOW

Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel

Confirm exact part number — similar PNs may be different parts

PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.438 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.875 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT, body_diameter: 0.938 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5905-00-849-7364, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 45-5002M 7/8 IN. SHAFT

NSN: 5905-00-849-7364
FSC: 5905
CAGE: 11236 — CTS CORP BERNE DIV THICK FILM PRODUCTS GROUP (USA)

SPECIFICATIONS

body_style	CYLINDRICAL BUSHING MOUNTED
body_length	0.438 INCHES NOMINAL IN
shaft_style	ROUND, SLOTTED
shaft_length	0.875 INCHES NOMINAL IN
actuator_type	SINGLE SHAFT
body_diameter	0.938 INCHES NOMINAL IN
shaft_diameter	0.250 INCHES NOMINAL IN
mounting_method	STANDARD BUSHING
section_quantity	1
terminal_location	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
device_design_type	NONTURN AT 3:00 OCLOCKUNABLE TO DECODE
nonturn_device_radius	0.469 INCHES NOMINAL IN
NSN	5905-00-849-7364

COMPONENT DIAGRAM

KEY FEATURES

•

MOUNTING BUSHING LENGTH: 0.375 INCHES NOMINAL IN

•

BODY LENGTH: 0.438 INCHES NOMINAL IN

•

SHAFT STYLE: ROUND, SLOTTED

•

SHAFT DIAMETER: 0.250 INCHES NOMINAL IN

•

BODY STYLE: CYLINDRICAL BUSHING MOUNTED

•

NONTURN DEVICE RADIUS: 0.469 INCHES NOMINAL IN

•

SCREW THREAD QUANTITY PER INCH: 32.0

•

MOUNTING METHOD: STANDARD BUSHING

TECHNICAL CHARACTERISTICS

MOUNTING BUSHING LENGTH	0.375 INCHES NOMINAL IN
BODY LENGTH	0.438 INCHES NOMINAL IN
SHAFT STYLE	ROUND, SLOTTED
SHAFT DIAMETER	0.250 INCHES NOMINAL IN
BODY STYLE	CYLINDRICAL BUSHING MOUNTED
NONTURN DEVICE RADIUS	0.469 INCHES NOMINAL IN
SCREW THREAD QUANTITY PER INCH	32.0
MOUNTING METHOD	STANDARD BUSHING
SCREW THREAD SERIES DESIGNATOR	UNEF
ELECTRICAL RESISTANCE PER SECTION	50.0 KILOHMS SINGLE SECTION

VERIFIED SUBSTITUTES & CROSS-REFERENCES 5

210-0001-3InterchangeableGOVERNMENT REGISTRY

interchangeable cross-reference

interchangeable

20CInterchangeableGOVERNMENT REGISTRY

interchangeable cross-reference

interchangeable

MIL-PRF-94/4InterchangeableGOVERNMENT REGISTRY

interchangeable cross-reference

interchangeable

380-2509-000InterchangeableGOVERNMENT REGISTRY

interchangeable cross-reference

interchangeable

2-5002M 7/8 IN. SHAFTInterchangeableGOVERNMENT REGISTRY

Same NIIN cross-reference

interchangeable

LIFECYCLE

StatusACTIVEGOVERNMENT REGISTRY

AvailabilityOEM and secondary market

RoHS CompliantEAR99Not HAZMAT

Ready to buy 45-5002M 7/8 IN. SHAFT?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 45-5002M 7/8 IN. SHAFT?

45-5002M 7/8 IN. SHAFT is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).

What parts can replace 45-5002M 7/8 IN. SHAFT?

There are 5 known substitutes for 45-5002M 7/8 IN. SHAFT: 210-0001-3, 20C, MIL-PRF-94/4 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 45-5002M 7/8 IN. SHAFT?

45-5002M 7/8 IN. SHAFT is cataloged in the Federal Logistics Information System under NSN 5905-00-849-7364. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

45-5002M 7/8 IN. SHAFT — Technical Data Sheet

Request a Quote — 45-5002M 7/8 IN. SHAFT