PartsTable
Technical Data Sheet
Download PDF

45-357 — GASKET

✓ Government record, cited
Lindy · ORING SEAL
PRODUCT OVERVIEW

45-357: GASKET.

Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T. Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500MHz.

These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The 100% Component test slip included in each polybag ensures flawless compatibility between devices, each component of the cable is individually tested helping to eliminate problems such as insertion loss, return loss and crosstalk.

The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The halogen-free This part is cataloged in the U.S.

Government catalog under NSN 5330-00-363-4692, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
45-357
NSN: 5330-00-363-4692
NIINs: 003634692, 004808194
FSC: 5330 — Packing and Gasket Materials
CAGE: 79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
materialPLASTIC
foldabilityNONFOLDABLE
border_colorCOLORLESS
mounting_typeSELF-CONTAINED FOR WALL
overall_width4.375 INCHES NOMINAL IN
overall_height76.375 INCHES NOMINAL IN
overall_length100.625 INCHES NOMINAL IN
surface_finishMATTE WHITE
surface_featureSOLID
prime_mover_typeSPRING
installation_designPORTABLE
picture_maximum_height72.000 INCHES IN
NSN5330-00-363-4692
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 45-357 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
•
BEARING SURFACE WIDTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
BEARING SURFACE WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
C4909Reference document
Same NSN cross-reference
Reference document — Secondary reference
M600B201Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 45-357?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 45-357?
45-357 is a GASKET manufactured by Lindy.
What parts can replace 45-357?
There are 2 known substitutes for 45-357: C4909, M600B201. Substitute compatibility should be verified for your specific system.
What is the NSN for 45-357?
45-357 is cataloged in the U.S. Government catalog under NSN 5330-00-363-4692. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 45-357