PartsTable
Technical Data Sheet
Download PDF

45-135038 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

45-135038: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, fork_depth: 0.500 INCHES NOMINAL IN, thread_class: 3A ROD CONNECTION A, hole_diameter: 0.190 INCHES NOMINAL IN, overall_width: 0.250 INCHES NOMINAL IN, thread_length: 1.888 INCHES NOMINAL ROD CONNECTION IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-597-8672, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
45-135038
NSN: 5340-00-597-8672
FSC: 5340 — Hardware, Commercial
CAGE: 7EK50 — TEXTRON AVIATION INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
fork_depth0.500 INCHES NOMINAL IN
thread_class3A ROD CONNECTION A
hole_diameter0.190 INCHES NOMINAL IN
overall_width0.250 INCHES NOMINAL IN
thread_length1.888 INCHES NOMINAL ROD CONNECTION IN
shank_diameter0.190 INCHES NOMINAL IN
fork_span_width0.120 INCHES NOMINAL IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
surface_treatmentCADMIUM OVERALL
fork_arm_thickness0.065 INCHES NOMINAL IN
NSN5340-00-597-8672
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 45-135038 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.190 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.120 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.065 INCHES NOMINAL IN
•
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END: 0.190 INCHES NOMINAL IN
•
THREAD LENGTH: 1.888 INCHES NOMINAL ROD CONNECTION IN
•
STYLE DESIGNATOR: CLEVIS
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.190 INCHES NOMINAL IN
FORK SPAN WIDTH0.120 INCHES NOMINAL IN
FORK ARM THICKNESS0.065 INCHES NOMINAL IN
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END0.190 INCHES NOMINAL IN
THREAD LENGTH1.888 INCHES NOMINAL ROD CONNECTION IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH0.250 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE0.190 INCHES ROD CONNECTION IN
SURFACE TREATMENTCADMIUM OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 45-135038?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 45-135038?
45-135038 is a CLEVIS,ROD END.
What is the NSN for 45-135038?
45-135038 is cataloged in the U.S. Government catalog under NSN 5340-00-597-8672. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 45-135038