45-038-72 — DUMMY CONNECTOR,PLUG

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

45-038-72: DUMMY CONNECTOR,PLUG.

The DUMMY CONNECTOR,PLUG is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OVERALL, body_style: PLAIN, SOLID, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD, pitch_diameter: 1.5000 INCHES NOMINAL IN, pressure_angle: 20.0000 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 3020-01-197-2134, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

45-038-72

NSN: 3020-01-197-2134
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)

SPECIFICATIONS

material	ALUMINUM ALLOY 6061 OVERALL
body_style	PLAIN, SOLID
bore_style	PLAIN BOTH ENDS
tooth_form	STANDARD
pitch_diameter	1.5000 INCHES NOMINAL IN
pressure_angle	20.0000 DEGREES
teeth_quantity	72
style_designator	PROTRUDING HUB
end_nominal_length	0.250 INCHES FIRST END IN
face_nominal_width	0.130 INCHES IN
end_nominal_diameter	0.250 INCHES FIRST END IN
hub_style_designator	1 STEP FIRST END
NSN	3020-01-197-2134

COMPONENT DIAGRAM

KEY FEATURES

•

BORE NOMINAL DIAMETER: 0.187 INCHES BOTH ENDS IN

•

TEETH QUANTITY: 72

•

BODY STYLE: PLAIN, SOLID

•

BORE STYLE: PLAIN BOTH ENDS

•

NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.280 INCHES FIRST END IN

•

FIRST STEP NOMINAL LENGTH: 0.010 INCHES FIRST END IN

•

STYLE DESIGNATOR: PROTRUDING HUB

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

TECHNICAL CHARACTERISTICS

BORE NOMINAL DIAMETER	0.187 INCHES BOTH ENDS IN
TEETH QUANTITY	72
BODY STYLE	PLAIN, SOLID
BORE STYLE	PLAIN BOTH ENDS
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	0.280 INCHES FIRST END IN
FIRST STEP NOMINAL LENGTH	0.010 INCHES FIRST END IN
STYLE DESIGNATOR	PROTRUDING HUB
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
PITCH DIAMETER	1.5000 INCHES NOMINAL IN
TOOTH FORM	STANDARD

SUBSTITUTES & CROSS-REFERENCES 3

1412583Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

1412583-72Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

45-038Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy 45-038-72?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 45-038-72?

45-038-72 is a DUMMY CONNECTOR,PLUG.

What parts can replace 45-038-72?

There are 3 known substitutes for 45-038-72: 1412583, 1412583-72, 45-038. Substitute compatibility should be verified for your specific system.

What is the NSN for 45-038-72?

45-038-72 is cataloged in the U.S. Government catalog under NSN 3020-01-197-2134. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

45-038-72 — DUMMY CONNECTOR,PLUG

Request a Quote — 45-038-72