PartsTable
Technical Data Sheet
Download PDF

44N(0.187)-FL — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

44N(0.187)-FL: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: CLINCH, nut_height: 0.177 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), pilot_diameter: 0.1970 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-437-4601, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
44N(0.187)-FL
NSN: 5310-00-437-4601
FSC: 5310 — Nuts and Washers
CAGE: 86577 — PRECISION METAL PRODUCTS CO (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleCLINCH
nut_height0.177 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.1970 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.250 INCHES NOMINAL IN
nominal_thread_size0.112 INCHES IN
thread_quantity_per_inch40
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-437-4601
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 44N(0.187)-FL · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
PILOT DIAMETER: 0.1970 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
NUT HEIGHT: 0.177 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.250 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES IN
PILOT DIAMETER0.1970 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
NUT HEIGHT0.177 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
NUT STYLECLINCH
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 6
203N177FLReference document
Same NSN cross-reference
Reference document — Secondary reference
44N187FLReference document
Same NSN cross-reference
Reference document — Secondary reference
FN440-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
413864-4Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
950265-16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
917AS6582-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 44N(0.187)-FL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 44N(0.187)-FL?
44N(0.187)-FL is a NUT,PLAIN,CLINCH.
What parts can replace 44N(0.187)-FL?
There are 6 known substitutes for 44N(0.187)-FL: 203N177FL, 44N187FL, FN440-5 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 44N(0.187)-FL?
44N(0.187)-FL is cataloged in the U.S. Government catalog under NSN 5310-00-437-4601. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 44N(0.187)-FL

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.