PartsTable
Technical Data Sheet
Download PDF

44932C NON-ASBESTOS — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

44932C NON-ASBESTOS: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include outside_diameter: 2.057 INCHES MINIMUM AND 2.060 INCHES MAXIMUM IN, special_features: MATERIAL NON-ASBESTOS, aperture_diameter: 1.438 INCHES NOMINAL IN, cross-sectional_thickness: 0.279 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN, environmental_attribute_code: ASBESTOS ALTERNATIVE PRODUCTS. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-380-9134, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
44932C NON-ASBESTOS
NSN: 5330-01-380-9134
FSC: 5330 — Packing and Gasket Materials
CAGE: 64104 — DRESSER, LLC (USA)
SPECIFICATIONS
outside_diameter2.057 INCHES MINIMUM AND 2.060 INCHES MAXIMUM IN
special_featuresMATERIAL NON-ASBESTOS
aperture_diameter1.438 INCHES NOMINAL IN
cross-sectional_thickness0.279 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-380-9134
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 44932C NON-ASBESTOS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.279 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.057 INCHES MINIMUM AND 2.060 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 1.438 INCHES NOMINAL IN
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.279 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.057 INCHES MINIMUM AND 2.060 INCHES MAXIMUM IN
APERTURE DIAMETER1.438 INCHES NOMINAL IN
SPECIAL FEATURESMATERIAL NON-ASBESTOS
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 44932C NON-ASBESTOS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 44932C NON-ASBESTOS?
44932C NON-ASBESTOS is a GASKET.
What is the NSN for 44932C NON-ASBESTOS?
44932C NON-ASBESTOS is cataloged in the U.S. Government catalog under NSN 5330-01-380-9134. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 44932C NON-ASBESTOS