PartsTable
Technical Data Sheet
Download PDF

4487D515 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4487D515: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: RECESSED, seal_width: 0.375 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, housing_bore_diameter: 2.745 INCHES MINIMUM AND 2.747 INCHES MAXIMUM IN, sealing_element_style: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-418-4975, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4487D515
NSN: 5330-00-418-4975
FSC: 5330 — Packing and Gasket Materials
CAGE: 82402 — TRIUMPH GEAR SYSTEMS INC DBA TRIUMPH GEAR SYSTEMS INC (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleRECESSED
seal_width0.375 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
housing_bore_diameter2.745 INCHES MINIMUM AND 2.747 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.000 INCHES NOMINAL IN
NSN5330-00-418-4975
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4487D515 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 2.745 INCHES MINIMUM AND 2.747 INCHES MAXIMUM IN
•
CASE STYLE: RECESSED
•
ACCOMMODATED SHAFT DIAMETER: 2.000 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
SEAL WIDTH0.375 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER2.745 INCHES MINIMUM AND 2.747 INCHES MAXIMUM IN
CASE STYLERECESSED
ACCOMMODATED SHAFT DIAMETER2.000 INCHES NOMINAL IN
MATERIALSTEEL CASE
SUBSTITUTES & CROSS-REFERENCES 3
513165Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
37C300490P102Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
50-8075Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 4487D515?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4487D515?
4487D515 is a SEAL,PLAIN ENCASED.
What parts can replace 4487D515?
There are 3 known substitutes for 4487D515: 513165, 37C300490P102, 50-8075. Substitute compatibility should be verified for your specific system.
What is the NSN for 4487D515?
4487D515 is cataloged in the U.S. Government catalog under NSN 5330-00-418-4975. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4487D515