PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 44847
44847 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 44847 is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, hole_diameter: 0.656 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.500 INCHES NOMINAL IN, overall_length: 6.500 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 5.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-480-3914, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
44847
NSN: 5330-00-480-3914
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
hole_diameter0.656 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width6.500 INCHES NOMINAL IN
overall_length6.500 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter5.000 INCHES NOMINAL IN
bolt_hole_quantity4
outside_corner_radius0.625 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
outside_edge_to_bolt_hole_center_distance_along_width0.625 INCHES NOMINAL IN
NSN5330-00-480-3914
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 44847 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
3562Interchangeable
interchangeable cross-reference
interchangeable
AG179703Interchangeable
interchangeable cross-reference
interchangeable
179703-104Interchangeable
interchangeable cross-reference
interchangeable
9P39Interchangeable
interchangeable cross-reference
interchangeable
DS932759Interchangeable
interchangeable cross-reference
interchangeable
44847Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 44847?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 44847?
44847 is a 44847.
What parts can replace 44847?
There are 16 known substitutes for 44847: 3562, AG179703, 179703-104 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 44847?
44847 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-480-3914. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 44847

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026