PartsTable
Technical Data Sheet
Download PDF

4462-25 — SWITCH,PUSH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

4462-25: SWITCH,PUSH.

The SWITCH,PUSH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 321 OVERALL, hole_diameter: 0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN, outside_diameter: 0.498 INCHES MINIMUM AND 0.508 INCHES MAXIMUM IN, material_thickness: 0.0380 INCHES MINIMUM AND 0.0405 INCHES MAXIMUM IN, fsc_application_data: WSC,ANTENNA, end_item_identification: AB212 HELICOPTER. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-860-1113, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4462-25
NSN: 5310-00-860-1113
NIINs: 008601113, 012541239, 014663068
FSC: 5310 — Nuts and Washers
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 321 OVERALL
hole_diameter0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
outside_diameter0.498 INCHES MINIMUM AND 0.508 INCHES MAXIMUM IN
material_thickness0.0380 INCHES MINIMUM AND 0.0405 INCHES MAXIMUM IN
fsc_application_dataWSC,ANTENNA
external_key_quantity8
end_item_identificationAB212 HELICOPTER
external_prebent_key_angle3.0 DEGREES MINIMUM AND 7.0 DEGREES MAXIMUM
external_prebent_key_width0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
overall_distance_including_keys0.960 INCHES MINIMUM AND 0.980 INCHES MAXIMUM IN
material_document_and_classificationAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_centerline_to_inside_of_prebent_key0.295 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN
NSN5310-00-860-1113
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4462-25 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM CENTERLINE TO INSIDE OF PREBENT KEY: 0.295 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN
•
OVERALL DISTANCE INCLUDING KEYS: 0.960 INCHES MINIMUM AND 0.980 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.498 INCHES MINIMUM AND 0.508 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.0380 INCHES MINIMUM AND 0.0405 INCHES MAXIMUM IN
•
EXTERNAL KEY QUANTITY: 8
•
EXTERNAL PREBENT KEY ANGLE: 3.0 DEGREES MINIMUM AND 7.0 DEGREES MAXIMUM
•
EXTERNAL PREBENT KEY WIDTH: 0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
DISTANCE FROM CENTERLINE TO INSIDE OF PREBENT KEY0.295 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN
OVERALL DISTANCE INCLUDING KEYS0.960 INCHES MINIMUM AND 0.980 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.498 INCHES MINIMUM AND 0.508 INCHES MAXIMUM IN
MATERIAL THICKNESS0.0380 INCHES MINIMUM AND 0.0405 INCHES MAXIMUM IN
EXTERNAL KEY QUANTITY8
EXTERNAL PREBENT KEY ANGLE3.0 DEGREES MINIMUM AND 7.0 DEGREES MAXIMUM
EXTERNAL PREBENT KEY WIDTH0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
MATERIALSTEEL COMP 321 OVERALL
HOLE DIAMETER0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 4462-25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4462-25?
4462-25 is a SWITCH,PUSH.
What is the NSN for 4462-25?
4462-25 is cataloged in the U.S. Government catalog under NSN 5310-00-860-1113. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4462-25

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.