PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 44547
44547 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

PARTS KIT,LINEAR ACTUATING CYLIN. Key specifications include ink_color: BLACK, unit_type: DESK OR POCKET, pocket_clip: PROVIDED, pen_point_type: EXTRA FINE, special_features: FREE-INK PEN; .7MM NEEDLE POINT; W/VISIBLE INK SUPPLY WINDOWS IN BARREL MM, multiple_cartridge: NOT PROVIDED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-2234, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
44547
NSN: 3110-00-198-2234
FSC: 3110
CAGE: 50893 — RIDGE TOOL COMPANY (USA)
SPECIFICATIONS
ink_colorBLACK
unit_typeDESK OR POCKET
pocket_clipPROVIDED
pen_point_typeEXTRA FINE
special_featuresFREE-INK PEN; .7MM NEEDLE POINT; W/VISIBLE INK SUPPLY WINDOWS IN BARREL MM
multiple_cartridgeNOT PROVIDED
point_retractabilityNONRETRACTABLE
ink_cartridge_replaceabilityNONREPLACEABLE
printing_process_for_which_designedLETTERPRESS
NSN3110-00-198-2234
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 44547 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 28
•
THREAD LENGTH: 0.3125 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL IN
•
OUTER RING WIDTH: 0.4370 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
STUD DIAMETER: 0.2500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESMEANS FOR RELUBRICATION
THREAD QUANTITY PER INCH28
THREAD LENGTH0.3125 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.6250 INCHES NOMINAL IN
OUTER RING WIDTH0.4370 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.250 INCHES IN
THREAD DIRECTIONRIGHT-HAND
STUD DIAMETER0.2500 INCHES NOMINAL IN
STUD LENGTH0.7500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
CR101Interchangeable
interchangeable cross-reference
interchangeable
1221Interchangeable
interchangeable cross-reference
interchangeable
215-509Interchangeable
interchangeable cross-reference
interchangeable
E3SPInterchangeable
interchangeable cross-reference
interchangeable
44547Interchangeable
interchangeable cross-reference
interchangeable
A-A-2998 SZ2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 44547?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 44547?
44547 is a PARTS KIT,LINEAR ACTUATING CYLIN.
What parts can replace 44547?
There are 26 known substitutes for 44547: CR101, 1221, 215-509 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 44547?
44547 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-2234. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 44547

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026