PartsTable
Technical Data Sheet
Download PDF

4446-1046P1 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4446-1046P1: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.330 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 8.375 INCHES NOMINAL IN, aperture_width: 6.046 INCHES NOMINAL IN, overall_length: 8.375 INCHES NOMINAL IN, aperture_length: 6.046 INCHES NOMINAL IN, gage_ring_thickness: 0.088 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-914-6264, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4446-1046P1
NSN: 5330-00-914-6264
FSC: 5330 — Packing and Gasket Materials
CAGE: 49956 — RAYTHEON COMPANY DIV CORP (USA)
SPECIFICATIONS
hole_diameter0.330 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width8.375 INCHES NOMINAL IN
aperture_width6.046 INCHES NOMINAL IN
overall_length8.375 INCHES NOMINAL IN
aperture_length6.046 INCHES NOMINAL IN
gage_ring_thickness0.088 INCHES NOMINAL IN
inside_corner_radius0.030 INCHES NOMINAL IN
outside_corner_radius0.467 INCHES NOMINAL IN
cross-sectional_thickness0.142 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL AND SYNTHETIC RUBBER
outside_edge_to_bolt_hole_center_distance_along_width1.750 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width2.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-914-6264
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4446-1046P1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.142 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.030 INCHES NOMINAL IN
•
GAGE RING THICKNESS: 0.088 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND SYNTHETIC RUBBER
•
APERTURE WIDTH: 6.046 INCHES NOMINAL IN
•
APERTURE LENGTH: 6.046 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.142 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.030 INCHES NOMINAL IN
GAGE RING THICKNESS0.088 INCHES NOMINAL IN
OVERALL LENGTH8.375 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEMETAL AND SYNTHETIC RUBBER
OVERALL WIDTH8.375 INCHES NOMINAL IN
APERTURE WIDTH6.046 INCHES NOMINAL IN
APERTURE LENGTH6.046 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH2.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 2
100479Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2776-5004P16Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 4446-1046P1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4446-1046P1?
4446-1046P1 is a GASKET.
What parts can replace 4446-1046P1?
There are 2 known substitutes for 4446-1046P1: 100479, 2776-5004P16. Substitute compatibility should be verified for your specific system.
What is the NSN for 4446-1046P1?
4446-1046P1 is cataloged in the U.S. Government catalog under NSN 5330-00-914-6264. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4446-1046P1