PartsTable
Technical Data Sheet
PartsTable / MRO / 44429
44429 ✓ Verified by PartsTable
Lindy · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SOCKET,SOCKET WRENCH is a Lindy industrial component. Key specifications include diameter: 0.313 INCHES NOMINAL IN, material: STEEL OVERALL, back_width: 9.000 INCHES NOMINAL IN, base_style: MEDIUM SCREW, cut_length: 0.750 INCHES NOMINAL IN, point_type: CONVENTIONAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-135-9808, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 44429
NSN: 5330-00-135-9808
FSC: 5330
CAGE: 29215 — JENNY PRODUCTS, INC (USA)
SPECIFICATIONS
diameter0.313 INCHES NOMINAL IN
materialSTEEL OVERALL
back_width9.000 INCHES NOMINAL IN
base_styleMEDIUM SCREW
cut_length0.750 INCHES NOMINAL IN
point_typeCONVENTIONAL
shank_typeWELDON
strap_typeARM
back_length12.500 INCHES NOMINAL IN
design_formSINGLE END
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
NSN5330-00-135-9808
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 44429 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: PAPER AND GLUE AND GLYCERIN OVERALL
•
HOLE DIAMETER: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT CIRCLE DIAMETER: 5.062 INCHES NOMINAL IN
•
APERTURE DIAMETER: 3.938 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIALPAPER AND GLUE AND GLYCERIN OVERALL
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
BOLT CIRCLE DIAMETER5.062 INCHES NOMINAL IN
APERTURE DIAMETER3.938 INCHES NOMINAL IN
SPECIAL FEATURESNON E
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
OUTSIDE DIAMETER5.875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
1205 5/16Interchangeable
interchangeable cross-reference
interchangeable
B94.19Interchangeable
interchangeable cross-reference
interchangeable
S613CInterchangeable
interchangeable cross-reference
interchangeable
44429Interchangeable
interchangeable cross-reference
interchangeable
50ER30 120VInterchangeable
interchangeable cross-reference
interchangeable
22367-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 44429?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 44429?
44429 is a SOCKET,SOCKET WRENCH manufactured by Lindy. It is classified as a MRO (MRO_GENERAL).
What parts can replace 44429?
There are 12 known substitutes for 44429: 1205 5/16, B94.19, S613C and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 44429?
44429 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-135-9808. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 44429

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026