PartsTable / COMPONENT / 44334
44334
✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
- For digital cameras without filter thread and mobile phones with photo function <br>- 0.5fold magnification for extra-strong wide-angle effect <br>- The enclosed metal ring (° 22 mm, on one side magnetic, on the other side self-adhesive) is stuck to the camera (around the lens) and serves as contact point for the wide-angle lens <br>- Incl. safety loop, lid and lens pouch <br>- For camera models with up to 10 million pixels This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-9871, indicating validated use in U.S. government and defense logistics supply chains.
WHERE IT FITS
44334
NSN: 5330-00-291-9871 FSC: 5330 CAGE: 64104 — DRESSER, LLC (USA)
SPECIFICATIONS
material STEEL OVERALL physical_form LIQUID drive_end_shape SQUARE SINGLE END INTERNAL special_features STANDARD LENGTH style_designator INTERNAL-INTERNAL features_provided MANUAL TOOL surface_treatment CHROMIUM OVERALL drive_surface_size 0.375 INCHES NOMINAL SINGLE END IN primary_container_type VIAL wrenching_surface_size 0.562 INCHES NOMINAL SINGLE END IN wrenching_surface_shape 12 POINT SINGLE END INTERNAL protective_storage_feature REQUIRES REFRIGERATION STORAGE BETWEEN 2 TO 8 DEG CELSIUS NSN 5330-00-291-9871
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 44334
MFR: Hama
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• CROSS-SECTIONAL THICKNESS: 0.010 INCHES NOMINAL IN
• APERTURE DIAMETER: 1.256 INCHES MINIMUM AND 1.276 INCHES MAXIMUM IN
• MATERIAL: PAPER AND GLUE OVERALL
• MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
• STYLE DESIGNATOR: CIRCULAR
• OUTSIDE DIAMETER: 1.428 INCHES MINIMUM AND 1.448 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION CROSS-SECTIONAL THICKNESS 0.010 INCHES NOMINAL IN APERTURE DIAMETER 1.256 INCHES MINIMUM AND 1.276 INCHES MAXIMUM IN MATERIAL PAPER AND GLUE OVERALL MATERIAL DOCUMENT AND CLASSIFICATION MIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL STYLE DESIGNATOR CIRCULAR OUTSIDE DIAMETER 1.428 INCHES MINIMUM AND 1.448 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
F89F364 Interchangeable interchangeable cross-reference
interchangeable
44334 Interchangeable interchangeable cross-reference
interchangeable
9-44334 Interchangeable interchangeable cross-reference
interchangeable
00944334000 Interchangeable interchangeable cross-reference
interchangeable
5334700 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 44334?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 44334?
44334 is a SOCKET,SOCKET WRENCH manufactured by Hama.
What parts can replace 44334?
There are 5 known substitutes for 44334: F89F364, 44334, 9-44334 and 2 more. Substitute compatibility should be verified for your specific system.
Is 44334 still available?
44334 is currently cancelled.