PartsTable
Technical Data Sheet
44312 ✓ Verified by PartsTable
Hama · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- Universal intermediate wall outlet - 10 dB.<br>- For receiving satellite/cable/Internet/telephone/Unicable.<br>- Suitable for DVB-S/-C/-T.<br>- Multimedia compatible with return path, 5 to 65 MHZ (Internet/telephone).<br>- Ideal for SAT unicable systems (unicable compatible).<br>- Diode isolated SAT connection.<br>- Extended F-socket (makes mounting easier).<br>- Decoupling via filter technology.<br>- Suitable for covers which comply with German standards, e.g. for Bush+Jäger. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-144-8558, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
44312
NSN: 3110-00-144-8558
FSC: 3110
CAGE: 30076 — HYSTER-YALE GROUP, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
drive_end_shapeSQUARE SINGLE END INTERNAL
special_featuresSTANDARD LENGTH
style_designatorINTERNAL-INTERNAL
features_providedMANUAL TOOL
surface_treatmentCHROMIUM OVERALL
drive_surface_size0.375 INCHES NOMINAL SINGLE END IN
wrenching_surface_size18.0 MILLIMETERS NOMINAL SINGLE END MM
wrenching_surface_shape12 POINT SINGLE END INTERNAL
NSN3110-00-144-8558
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 44312 · Hama ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
MATERIAL: STEEL OUTER RING
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONABEC NO.1
OVERALL WIDTH18.00 MILLIMETERS NOMINAL MM
MATERIALSTEEL OUTER RING
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL BALL
MATERIALSTEEL INNER RING
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
OVERALL OUTSIDE DIAMETER95.00 MILLIMETERS NOMINAL MM
BORE DIAMETER60.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
9112Interchangeable
interchangeable cross-reference
interchangeable
2618Interchangeable
interchangeable cross-reference
interchangeable
4920G0060Interchangeable
interchangeable cross-reference
interchangeable
LAK1/2Interchangeable
interchangeable cross-reference
interchangeable
3L1-2Interchangeable
interchangeable cross-reference
interchangeable
1290095Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 44312?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 44312?
44312 is a BEARING,BALL,ANNULAR manufactured by Hama.
What parts can replace 44312?
There are 24 known substitutes for 44312: 9112, 2618, 4920G0060 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 44312?
44312 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-144-8558. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 44312