PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 442-753
442-753 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BELTS,V,MATCHED SET is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, head_diameter: 1.7 MILLIMETERS NOMINAL MM, thread_length: 6.0 MILLIMETERS NOMINAL MM, screw_material: STEEL CORROSION RESISTING, fastener_length: 6.0 MILLIMETERS NOMINAL MM, locking_feature: PATCH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-044-2753, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
442-753
NSN: 5306-00-044-2753
FSC: 5306
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
head_diameter1.7 MILLIMETERS NOMINAL MM
thread_length6.0 MILLIMETERS NOMINAL MM
screw_materialSTEEL CORROSION RESISTING
fastener_length6.0 MILLIMETERS NOMINAL MM
locking_featurePATCH
thread_directionRIGHT-HAND
countersink_angle90.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM
internal_drive_styleTRI-WING RECESS
nominal_thread_diameter3.0 MILLIMETERS MM
screw_surface_treatmentPASSIVATE
locking_feature_materialPLASTIC POLYAMIDE NYLON
NSN5306-00-044-2753
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 442-753 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
•
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
MINIMUM TENSILE STRENGTH: 95000 POUNDS PER SQUARE INCH LBS
•
LOCKING FEATURE: DISTORTIONS BEARING SURFACE OF HEAD
•
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH LBS
•
HEAD HEIGHT: 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNF
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
MINIMUM TENSILE STRENGTH95000 POUNDS PER SQUARE INCH LBS
LOCKING FEATUREDISTORTIONS BEARING SURFACE OF HEAD
MINIMUM YIELD STRENGTH85000 POUNDS PER SQUARE INCH LBS
HEAD HEIGHT0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNF
THREAD LENGTH0.500 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH24
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
490-3Interchangeable
interchangeable cross-reference
interchangeable
4-7253-3Interchangeable
interchangeable cross-reference
interchangeable
MILB11040Interchangeable
interchangeable cross-reference
interchangeable
442-753Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 442-753?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 442-753?
442-753 is a BELTS,V,MATCHED SET.
What parts can replace 442-753?
There are 4 known substitutes for 442-753: 490-3, 4-7253-3, MILB11040 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 442-753?
442-753 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-044-2753. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 442-753

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026