442-003-006 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

442-003-006: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: RECTANGULAR W/MOUNTING HOLES, body_width: 0.205 INCHES NOMINAL IN, body_height: 0.500 INCHES NOMINAL IN, body_length: 0.540 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.045 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-243-1452, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 442-003-006

NSN: 5905-00-243-1452
FSC: 5905 — Resistor
CAGE: C3141 — ELETTRONICA GMBH (DEU)

SPECIFICATIONS

body_style	RECTANGULAR W/MOUNTING HOLES
body_width	0.205 INCHES NOMINAL IN
body_height	0.500 INCHES NOMINAL IN
body_length	0.540 INCHES MAXIMUM IN
shaft_style	ROUND, SLOTTED
shaft_length	0.045 INCHES MAXIMUM IN
actuator_type	SINGLE SHAFT
shaft_diameter	0.078 INCHES NOMINAL IN
mounting_method	TERMINAL
terminal_length	0.172 INCHES MINIMUM IN
section_quantity	1
terminal_location	REAR END
NSN	5905-00-243-1452

COMPONENT DIAGRAM

KEY FEATURES

•

ELECTRICAL RESISTANCE PER SECTION: 500.000 OHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 150.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

SHAFT DIAMETER: 0.078 INCHES NOMINAL IN

•

BODY STYLE: RECTANGULAR W/MOUNTING HOLES

•

TERMINAL LENGTH: 0.172 INCHES MINIMUM IN

•

MOUNTING METHOD: TERMINAL

•

BODY WIDTH: 0.205 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

ELECTRICAL RESISTANCE PER SECTION	500.000 OHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.078 INCHES NOMINAL IN
BODY STYLE	RECTANGULAR W/MOUNTING HOLES
TERMINAL LENGTH	0.172 INCHES MINIMUM IN
MOUNTING METHOD	TERMINAL
BODY WIDTH	0.205 INCHES NOMINAL IN
BODY HEIGHT	0.500 INCHES NOMINAL IN
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-250.0 TO 250.0 SINGLE SECTION

SUBSTITUTES & CROSS-REFERENCES 3

MILR22097-3Reference document

Same NSN cross-reference

Reference document — Identification reference

869019-0501Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

RJ22CW501Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy 442-003-006?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 442-003-006?

442-003-006 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).

What parts can replace 442-003-006?

There are 3 known substitutes for 442-003-006: MILR22097-3, 869019-0501, RJ22CW501. Substitute compatibility should be verified for your specific system.

What is the NSN for 442-003-006?

442-003-006 is cataloged in the U.S. Government catalog under NSN 5905-00-243-1452. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

442-003-006 — RESISTOR,VARIABLE,NONWIRE WOUND,

Request a Quote — 442-003-006