PartsTable
Technical Data Sheet
Download PDF

44162 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
Sandberg · TAPERED BEARING
PRODUCT OVERVIEW

44162: CONE AND ROLLERS,TAPERED ROLLER.

This compact USB-C charger gives you 2 lightning-fast USB-C ports to charge your devices. You can choose to use one port at full power 65W, which is sufficient to charge most laptops with a USB-C power port. Or you can use both ports simultaneously, where the power is distributed, allowing you to charge, for example, a smartphone and tablet or a small laptop at the same time.

Safety approved and made with a flame-retardant casing. This part is cataloged in the U.S. Government catalog under NSN 3110-00-100-3604, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
44162
NSN: 3110-00-100-3604
NIINs: 001003604, 001237976, 007254020, 008084869, 012074167
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
special_featuresQUICK DRYING OIL BASE PAINT,MARKS OPAQUE AND GLOSSY ON ALMOST ANY SURFACE;COLORS INCLUDED 1 EA BLACK,RED,BLUE,GREEN,YELLOW,WHITE
component_quantity6
NSN3110-00-100-3604
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 44162 · Sandberg ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: STEEP ANGLE
•
CONE CORNER RADIUS: 0.0938 INCHES NOMINAL IN
•
CONE WIDTH: 0.9330 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.6250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSTEEP ANGLE
CONE CORNER RADIUS0.0938 INCHES NOMINAL IN
CONE WIDTH0.9330 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.6250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 8
142654Reference document
Same NSN cross-reference
Reference document — Secondary reference
611769Reference document
Same NSN cross-reference
Reference document — Secondary reference
BT44162Reference document
Same NSN cross-reference
Reference document — Secondary reference
AA59649Reference document
Same NSN cross-reference
Reference document — Identification reference
FF-B-187/01-243Reference document
Same NSN cross-reference
Reference document — Secondary reference
RM3A87-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 44162?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 44162?
44162 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Sandberg.
What parts can replace 44162?
There are 8 known substitutes for 44162: 142654, 611769, BT44162 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 44162?
44162 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3604. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 44162