PartsTable / MRO / 4416-6
4416-6
✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
Sandberg Survivor Cable 0.2m is an ultra-short charging cable that doesn’t compromise on strength. Built with double-braided Kevlar nylon and metal-cast connectors, it’s tested to withstand over 70 kg pull and 60,000 bends. The compact length is perfect for use with powerbanks, keeping things tidy on the go.
Supports fast charging up to 100W. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-248-3831, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO →
MRO_GENERAL →
4416-6
NSN: 5331-00-248-3831 FSC: 5331 — O-RINGCAGE: 96152 — BORG-WARNER CORP MARVEL-SCHEBLER/TILLOTSON DIV (USA)
SPECIFICATIONS
material COPPER ALLOY 836 OVERALL rating_method ELECTRICAL SINGLE COMPONENT SINGLE WINDING coil_form_type SOLID SINGLE COMPONENT inclosure_type FULLY INCLOSED overall_length 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN quality_factor 33 MINIMUM SINGLE COMPONENT SINGLE WINDING connection_type THREADED INTERNAL PIPE SECOND END mounting_method TERMINAL SINGLE GROUP connection_style PLAIN (PIPE) FIRST END outside_diameter 0.430 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN overall_diameter 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN special_features INDUCTANCE TOLERANCE,10 PCT NSN 5331-00-248-3831
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 4416-6
MFR: Sandberg
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• CENTER HOLE DIAMETER: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 0.430 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CENTER HOLE DIAMETER 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN OUTSIDE DIAMETER 0.430 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
DC500-2 Interchangeable interchangeable cross-reference
interchangeable
2 Interchangeable interchangeable cross-reference
interchangeable
ASHRAE 52.1 Interchangeable interchangeable cross-reference
interchangeable
44-166 Interchangeable interchangeable cross-reference
interchangeable
K10E44A Interchangeable interchangeable cross-reference
interchangeable
37902 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 4416-6?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4416-6?
4416-6 is a COIL,RADIO FREQUENCY manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 4416-6?
There are 25 known substitutes for 4416-6: DC500-2, 2, ASHRAE 52.1 and 22 more. Substitute compatibility should be verified for your specific system.
Is 4416-6 still available?
4416-6 is currently cancelled.