PartsTable
Technical Data Sheet
Download PDF

44157 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
Sandberg · TAPERED BEARING
PRODUCT OVERVIEW

44157: CONE AND ROLLERS,TAPERED ROLLER.

Sandberg USB-C AC Charger + Lightning 1M is a handy charger for sockets. It is equipped with a USB-C 20W PD output, so you can charge smartphones and tablets at full speed. Key specifications include special_features: FOR USE W/COBAS MIRA CHEMISTRY ANALYZER, component_quantity: 20, nonsupply_items_and_quantities: 3.0 ML VIALS OF SINGLE LEVEL LYOPHILIZED HUMAN SERUM BASED CALIBRATION 10; 4.0 ML BOTTLES DILUENT 10, part_name_assigned_by_controlling_agency: REFERENCE STD KIT SERUM F/USE W/COBAS MIRA CHEMISTRY ANALYZER.

This part is cataloged in the U.S. Government catalog under NSN 3110-01-035-7513, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
44157
NSN: 3110-01-035-7513
NIINs: 010357513, 013108322
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
special_featuresFOR USE W/COBAS MIRA CHEMISTRY ANALYZER
component_quantity20
nonsupply_items_and_quantities3.0 ML VIALS OF SINGLE LEVEL LYOPHILIZED HUMAN SERUM BASED CALIBRATION 10; 4.0 ML BOTTLES DILUENT 10
part_name_assigned_by_controlling_agencyREFERENCE STD KIT SERUM F/USE W/COBAS MIRA CHEMISTRY ANALYZER
NSN3110-01-035-7513
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 44157 · Sandberg ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 2.3 MILLIMETERS NOMINAL MM
•
CONE WIDTH: 23.698 MILLIMETERS NOMINAL MM
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 4
•
BORE DIAMETER: 40.0 MILLIMETERS NOMINAL MM
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS2.3 MILLIMETERS NOMINAL MM
CONE WIDTH23.698 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 4
BORE DIAMETER40.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
4922GReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 44157?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 44157?
44157 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Sandberg.
What parts can replace 44157?
There is 1 known substitute for 44157: 4922G. Substitute compatibility should be verified for your specific system.
What is the NSN for 44157?
44157 is cataloged in the U.S. Government catalog under NSN 3110-01-035-7513. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 44157