PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 44148
44148 ✓ Verified by PartsTable
Sandberg · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Sandberg USB-C AC Charger PD65W is a compact USB-C PD charger for fast charging your USB-C devices like smart phone, tablet, and laptop. With a performance of up to 65W you will have optimal charging speed for most of your devices. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-194-3686, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
44148
NSN: 5340-00-194-3686
FSC: 5340
CAGE: 50027 — UNDERSEA SENSOR SYSTEMS INC DIV ULTRA SONOBUOY SYSTEMS (USA)
SPECIFICATIONS
colorBLUE
length1.281 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON OVERALL
body_width3.560 INCHES MAXIMUM IN
flow_angle90.0 DEGREES
leg_length1.438 INCHES NOMINAL FIRST END IN
point_typeCONVENTIONAL
body_height2.230 INCHES MAXIMUM IN
body_length4.260 INCHES MAXIMUM IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length0.188 INCHES NOMINAL IN
NSN5340-00-194-3686
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 44148 MFR: Sandberg ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GROOVE WIDTH: 0.060 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE: HEXAGON
•
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEFT INTERNAL AND RIGHT EXTERNAL THREAD
•
LENGTH: 1.281 INCHES NOMINAL IN
•
GROOVE DIAMETER: 0.081 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
GROOVE WIDTH0.060 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEHEXAGON
WIDTH ACROSS FLATS0.250 INCHES NOMINAL IN
STYLE DESIGNATORLEFT INTERNAL AND RIGHT EXTERNAL THREAD
LENGTH1.281 INCHES NOMINAL IN
GROOVE DIAMETER0.081 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
2001 78Interchangeable
interchangeable cross-reference
interchangeable
503-S 78Interchangeable
interchangeable cross-reference
interchangeable
13378Interchangeable
interchangeable cross-reference
interchangeable
63106Interchangeable
interchangeable cross-reference
interchangeable
47-9311Interchangeable
interchangeable cross-reference
interchangeable
TLS42Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 44148?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 44148?
44148 is a RESISTOR,VARIABLE,WIRE WOUND,PRE manufactured by Sandberg.
What parts can replace 44148?
There are 13 known substitutes for 44148: 2001 78, 503-S 78, 13378 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 44148?
44148 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-194-3686. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 44148

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026