PartsTable
Technical Data Sheet
Download PDF

44143 — PUMP,FUEL,METERING AND DISTRIBUT

✓ Government record, cited
Sandberg · TAPERED BEARING
PRODUCT OVERVIEW

44143: PUMP,FUEL,METERING AND DISTRIBUT.

With the Sandberg USB-C + QC 3.0 Car Charger, you’ll always have a USB port to hand in your car. You get a USB-C connector for charging of smartphones and tablets, as well as a super fast QC 3.0 charging connector for charging of supported devices. The charger is also compatible with standard USB devices.

This part is cataloged in the U.S. Government catalog under NSN 3110-00-100-3600, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
44143
NSN: 3110-00-100-3600
NIINs: 001003600, 002669245, 004140922, 008478199, 010507285, 011472644
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
fsc_application_dataF16A/B AIRCRAFT FUEL SYSTEM
end_item_identificationFUEL PUMP PROPORTIONER P/N 60957
criticality_code_justificationAGAV
NSN3110-00-100-3600
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 44143 · Sandberg ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: STEEP ANGLE
•
CONE CORNER RADIUS: 0.0938 INCHES NOMINAL IN
•
CONE WIDTH: 0.9330 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.4375 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSTEEP ANGLE
CONE CORNER RADIUS0.0938 INCHES NOMINAL IN
CONE WIDTH0.9330 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.4375 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
0604389-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
TDAA4621AReference document
Same NSN cross-reference
Reference document — Secondary reference
0604389Reference document
Same NSN cross-reference
Reference document — Secondary reference
4996038Reference document
Same NSN cross-reference
Reference document — Secondary reference
BT44143Reference document
Same NSN cross-reference
Reference document — Secondary reference
187150Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 44143?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 44143?
44143 is a PUMP,FUEL,METERING AND DISTRIBUT manufactured by Sandberg.
What parts can replace 44143?
There are 6 known substitutes for 44143: 0604389-7, TDAA4621A, 0604389 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 44143?
44143 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3600. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 44143