PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 44098-5
44098-5 ✓ Verified by PartsTable
Gorenje · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,ANGLE is a Gorenje industrial component. Key specifications include material: STEEL COMP 410, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.500 INCHES NOMINAL IN, first_leg_length: 1.470 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, second_leg_style: END RADIUS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-087-9371, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
44098-5
NSN: 5340-00-087-9371
FSC: 5340
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 410
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleEND RADIUS
first_leg_width0.500 INCHES NOMINAL IN
first_leg_length1.470 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
second_leg_styleEND RADIUS
second_leg_width0.510 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length1.553 INCHES NOMINAL IN
surface_treatmentPASSIVATE
first_leg_thickness0.062 INCHES NOMINAL IN
first_leg_end_radius0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
NSN5340-00-087-9371
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 44098-5 MFR: Gorenje ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PASSIVATE
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.250 INCHES NOMINAL IN
•
SECOND LEG END RADIUS: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
•
SECOND LEG HOLE DIAMETER: 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 1.553 INCHES NOMINAL IN
•
FIRST LEG LENGTH: 1.470 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.250 INCHES NOMINAL IN
•
SECOND LEG STYLE: END RADIUS
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTPASSIVATE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.250 INCHES NOMINAL IN
SECOND LEG END RADIUS0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
SECOND LEG HOLE DIAMETER0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
SECOND LEG LENGTH1.553 INCHES NOMINAL IN
FIRST LEG LENGTH1.470 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.250 INCHES NOMINAL IN
SECOND LEG STYLEEND RADIUS
FIRST LEG WIDTH0.500 INCHES NOMINAL IN
FSC APPLICATION DATAENGINE,TURBO-JET
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
44098-5Interchangeable
interchangeable cross-reference
interchangeable
A77424Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 44098-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 44098-5?
44098-5 is a BRACKET,ANGLE manufactured by Gorenje.
What parts can replace 44098-5?
There are 2 known substitutes for 44098-5: 44098-5, A77424. Substitute compatibility should be verified for your specific system.
What is the NSN for 44098-5?
44098-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-087-9371. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 44098-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026