PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 440972
440972 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The DUMMY CONNECTOR,RECEPTACLE is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.312 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, housing_bore_diameter: 3.371 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-005-0808, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
440972
NSN: 5330-00-005-0808
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.312 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
housing_bore_diameter3.371 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.125 INCHES NOMINAL IN
NSN5330-00-005-0808
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 440972 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 2.125 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 3.371 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
SEAL WIDTH: 0.312 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
TEMP RATING: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER2.125 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER3.371 INCHES NOMINAL IN
MATERIALSTEEL CASE
SEAL WIDTH0.312 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CASE STYLESQUARE
TEMP RATING-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
44097-2Interchangeable
interchangeable cross-reference
interchangeable
10-1Interchangeable
interchangeable cross-reference
interchangeable
63052Interchangeable
interchangeable cross-reference
interchangeable
01228253-0003Interchangeable
interchangeable cross-reference
interchangeable
USA ELITE SHEATHInterchangeable
interchangeable cross-reference
interchangeable
E117Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 440972?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 440972?
440972 is a DUMMY CONNECTOR,RECEPTACLE.
What parts can replace 440972?
There are 12 known substitutes for 440972: 44097-2, 10-1, 63052 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 440972?
440972 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-005-0808. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 440972

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026