PartsTable
Technical Data Sheet
PartsTable / MRO / 440227
440227 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RESISTANCE ELEMENT is a the manufacturer industrial component. Key specifications include material: STEEL, unit_type: WIRE, terminal_type: WIRE LEAD, outside_diameter: 10.680 INCHES NOMINAL IN, aperture_diameter: 9.090 INCHES NOMINAL IN, electrical_resistance: 855.000 OHMS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-053-9075, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 440227
NSN: 5330-00-053-9075
FSC: 5330
CAGE: 80249 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. (USA)
SPECIFICATIONS
materialSTEEL
unit_typeWIRE
terminal_typeWIRE LEAD
outside_diameter10.680 INCHES NOMINAL IN
aperture_diameter9.090 INCHES NOMINAL IN
terminal_quantity2
electrical_resistance855.000 OHMS
nominal_pitch_distance2.500 INCHES IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
link_pin_nominal_diameter0.7810 INCHES IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
link_plate_width_at_pin_end1.937 INCHES NOMINAL IN
NSN5330-00-053-9075
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 440227 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 9.090 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 10.680 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER9.090 INCHES NOMINAL IN
OUTSIDE DIAMETER10.680 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
C1996Interchangeable
interchangeable cross-reference
interchangeable
440227Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 440227?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 440227?
440227 is a RESISTANCE ELEMENT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 440227?
There are 2 known substitutes for 440227: C1996, 440227. Substitute compatibility should be verified for your specific system.
What is the NSN for 440227?
440227 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-053-9075. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 440227

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026