PartsTable
Technical Data Sheet
PartsTable / O-RING / 4400181-1410
4400181-1410 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.506 INCHES NOMINAL IN, center_hole_diameter: 2.280 INCHES MINIMUM AND 2.320 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-115-2216, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4400181-1410
NSN: 5331-01-115-2216
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter2.506 INCHES NOMINAL IN
center_hole_diameter2.280 INCHES MINIMUM AND 2.320 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-01-115-2216
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4400181-1410 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 2.506 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 2.280 INCHES MINIMUM AND 2.320 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER2.506 INCHES NOMINAL IN
ELONGATION PERCENTAGE125 MAXIMUM
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER2.280 INCHES MINIMUM AND 2.320 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
2-141 V747-75Interchangeable
interchangeable cross-reference
interchangeable
10086602Interchangeable
interchangeable cross-reference
interchangeable
AS568-141AMS7280Interchangeable
interchangeable cross-reference
interchangeable
V3D10214 ITEM 18Interchangeable
interchangeable cross-reference
interchangeable
AMS7276Interchangeable
interchangeable cross-reference
interchangeable
AS83248/1CPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4400181-1410?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4400181-1410?
4400181-1410 is a O-RING.
What parts can replace 4400181-1410?
There are 19 known substitutes for 4400181-1410: 2-141 V747-75, 10086602, AS568-141AMS7280 and 16 more. Substitute compatibility should be verified for your specific system.
Is 4400181-1410 still available?
4400181-1410 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4400181-1410

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026