PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 44-Z-992-D15
44-Z-992-D15 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, POLYETHYLENE (PP), design_type: FRICTION, overall_diameter: 2.000 INCHES NOMINAL IN, inside_diameter_length: 0.750 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH, opening_inside_diameter_for_which_designed: 1.760 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-164-4597, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
44-Z-992-D15
NSN: 5340-01-164-4597
FSC: 5340
CAGE: 27315 — MORRIS MATERIAL HANDLING, INC. (USA)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP)
design_typeFRICTION
overall_diameter2.000 INCHES NOMINAL IN
inside_diameter_length0.750 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
opening_inside_diameter_for_which_designed1.760 INCHES NOMINAL IN
NSN5340-01-164-4597
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 44-Z-992-D15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
INSIDE DIAMETER LENGTH: 0.750 INCHES NOMINAL IN
•
OVERALL DIAMETER: 2.000 INCHES NOMINAL IN
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 1.760 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
DESIGN TYPE: FRICTION
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC, POLYETHYLENE (PP)
INSIDE DIAMETER LENGTH0.750 INCHES NOMINAL IN
OVERALL DIAMETER2.000 INCHES NOMINAL IN
OPENING INSIDE DIAMETER FOR WHICH DESIGNED1.760 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
DESIGN TYPEFRICTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
MS90726-34Upgraded Successor
successor cross-reference
successor
3537Upgraded Successor
successor cross-reference
successor
70008-34Upgraded Successor
successor cross-reference
successor
18Upgraded Successor
successor cross-reference
successor
2716-311Interchangeable
interchangeable cross-reference
interchangeable
195FInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 44-Z-992-D15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 44-Z-992-D15?
44-Z-992-D15 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 44-Z-992-D15?
There are 7 known substitutes for 44-Z-992-D15: MS90726-34, 3537, 70008-34 and 4 more. Substitute compatibility should be verified for your specific system.
Is 44-Z-992-D15 still available?
44-Z-992-D15 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 44-Z-992-D15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026