PartsTable
Technical Data Sheet
44-50 ✓ Verified by PartsTable
Multibrackets · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Multibrackets M Universal Cable Sock Self Wrapping edition. Finally a solution that gives you the highest quality of cablehide to an equal aggressive pricepoint. Match the quality in your home cinema or hifi system with equal quality when hiding your recess wiring.<br><br>The M Universal Cable Sock Self Wrapping is knitted polyester of highest quality and with sleek nordic design.

The M Universal Self Wrapping Cable Socks hold any type of cables for example Scart, HDMI, CRT, VGA and other main leads and expands easily.<br><br>Our product gives all users the possibility to individually choose length and colour depending on certain needs.<br><br>The M Universal Cable Sock Self Wrapping are perfect products for easy hide of your wiring at home, or in the office.<br><br>Use M Cable Sock Heat Cutter (Article No: 7 350 022 732 926) for cutting the M Universal Cable Socks to any desired legth. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-024-6347, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
44-50
NSN: 5340-00-024-6347
FSC: 5340
CAGE: 81400 — HASKEL INTERNATIONAL, LLC DBA HASKEL INTERNATIONAL, LLC (USA)
SPECIFICATIONS
width0.219 INCHES NOMINAL IN
materialSTEEL COMP 303 OVERALL
tip_typeFLAT TIP
nut_styleCASTELLATED, HEXAGON
body_width1.140 INCHES MAXIMUM IN
head_styleFLAT CHAMFER
nut_height0.266 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
body_height0.590 INCHES NOMINAL IN
body_length1.140 INCHES MAXIMUM IN
head_height0.250 INCHES NOMINAL IN
thread_class2A A
head_diameter0.562 INCHES NOMINAL IN
NSN5340-00-024-6347
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 44-50 MFR: Multibrackets ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
BODY OUTSIDE DIAMETER: 0.515 INCHES NOMINAL IN
FLANGE DIAMETER: 0.625 INCHES NOMINAL IN
END HOLE DIAMETER: 0.375 INCHES NOMINAL IN
LIP THICKNESS: 0.075 INCHES NOMINAL IN
MATERIAL: STEEL COMP 4130
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758, COMP 4130 MIL SPEC SINGLE MATERIAL RESPONSE
STYLE DESIGNATOR: PARALLEL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.531 INCHES NOMINAL IN
BODY OUTSIDE DIAMETER0.515 INCHES NOMINAL IN
FLANGE DIAMETER0.625 INCHES NOMINAL IN
END HOLE DIAMETER0.375 INCHES NOMINAL IN
LIP THICKNESS0.075 INCHES NOMINAL IN
MATERIALSTEEL COMP 4130
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758, COMP 4130 MIL SPEC SINGLE MATERIAL RESPONSE
STYLE DESIGNATORPARALLEL
CASEHARDENING INDICATORNOT CASEHARDENED
BODY INSIDE DIAMETER0.437 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
4450Upgraded Successor
successor cross-reference
successor
1298Interchangeable
interchangeable cross-reference
interchangeable
120073Interchangeable
interchangeable cross-reference
interchangeable
601128Interchangeable
interchangeable cross-reference
interchangeable
161-53Interchangeable
interchangeable cross-reference
interchangeable
A2510Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 44-50?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 44-50?
44-50 is a CUP,TAPERED ROLLER BEARING manufactured by Multibrackets.
What parts can replace 44-50?
There are 9 known substitutes for 44-50: 4450, 1298, 120073 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 44-50?
44-50 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-024-6347. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 44-50