PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 44-1-16-0
44-1-16-0 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FASTENER,PAWL is a the manufacturer industrial component. Key specifications include width: 0.875 INCHES NOMINAL IN, height: 1.750 INCHES NOMINAL IN, length: 1.250 INCHES NOMINAL IN, diameter: 0.562 INCHES NOMINAL IN, material: STEEL OVERALL, pawl_type: STRAIGHT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-925-8228, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
44-1-16-0
NSN: 5340-00-925-8228
FSC: 5340
CAGE: 94222 — SOUTHCO INC (USA)
SPECIFICATIONS
width0.875 INCHES NOMINAL IN
height1.750 INCHES NOMINAL IN
length1.250 INCHES NOMINAL IN
diameter0.562 INCHES NOMINAL IN
materialSTEEL OVERALL
pawl_typeSTRAIGHT
knob_length0.188 INCHES NOMINAL IN
pawl_swing_angle90.0 DEGREES NOMINAL
special_featuresHOLE QUANTITY:2
style_designatorKNURLED
surface_treatmentCADMIUM AND CHROMATE OVERALL
operational_directionRIGHT-HAND
NSN5340-00-925-8228
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 44-1-16-0 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEIGHT: 1.750 INCHES NOMINAL IN
•
WIDTH: 0.875 INCHES NOMINAL IN
•
DIAMETER: 0.562 INCHES NOMINAL IN
•
STYLE DESIGNATOR: KNURLED
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL: STEEL OVERALL
•
PAWL ACTUATION METHOD: KNOB
TECHNICAL CHARACTERISTICS (FLIS)
HEIGHT1.750 INCHES NOMINAL IN
WIDTH0.875 INCHES NOMINAL IN
DIAMETER0.562 INCHES NOMINAL IN
STYLE DESIGNATORKNURLED
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIALSTEEL OVERALL
SPECIAL FEATURESHOLE QUANTITY:2
PAWL ACTUATION METHODKNOB
MOUNTING PLATE TO PAWL DISTANCE0.125 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
MOUNTING HOLE DIAMETER0.193 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
20217-4Interchangeable
interchangeable cross-reference
interchangeable
695805-1Interchangeable
interchangeable cross-reference
interchangeable
03J50Interchangeable
interchangeable cross-reference
interchangeable
5070-060Interchangeable
interchangeable cross-reference
interchangeable
12J50Interchangeable
interchangeable cross-reference
interchangeable
202174PCJ5054Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 44-1-16-0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 44-1-16-0?
44-1-16-0 is a FASTENER,PAWL.
What parts can replace 44-1-16-0?
There are 18 known substitutes for 44-1-16-0: 20217-4, 695805-1, 03J50 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 44-1-16-0?
44-1-16-0 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-925-8228. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 44-1-16-0

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026