PartsTable
Technical Data Sheet
Download PDF

4391160-1 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

4391160-1: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.125 INCHES NOMINAL IN, hole_diameter: 0.631 INCHES NOMINAL IN, overall_diameter: 1.124 INCHES NOMINAL IN, surface_treatment: OXIDE OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-351-0098, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4391160-1
NSN: 5310-00-351-0098
FSC: 5310 — Nuts and Washers
CAGE: 92392 — ALLIS-CHALMERS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.125 INCHES NOMINAL IN
hole_diameter0.631 INCHES NOMINAL IN
overall_diameter1.124 INCHES NOMINAL IN
surface_treatmentOXIDE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
inside_left_corner_chamfer_angle45.0 DEGREES NOMINAL
inside_right_corner_chamfer_angle45.0 DEGREES NOMINAL
NSN5310-00-351-0098
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4391160-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 1.124 INCHES NOMINAL IN
•
INSIDE RIGHT CORNER CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
INSIDE LEFT CORNER CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
COLOR: BLACK OVERALL
•
SURFACE TREATMENT: OXIDE OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER1.124 INCHES NOMINAL IN
INSIDE RIGHT CORNER CHAMFER ANGLE45.0 DEGREES NOMINAL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
INSIDE LEFT CORNER CHAMFER ANGLE45.0 DEGREES NOMINAL
COLORBLACK OVERALL
SURFACE TREATMENTOXIDE OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.631 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
4389910Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
569087-28Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 4391160-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4391160-1?
4391160-1 is a WASHER,FLAT.
What parts can replace 4391160-1?
There are 2 known substitutes for 4391160-1: 4389910, 569087-28. Substitute compatibility should be verified for your specific system.
What is the NSN for 4391160-1?
4391160-1 is cataloged in the U.S. Government catalog under NSN 5310-00-351-0098. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4391160-1