PartsTable
Technical Data Sheet
43895 ✓ Verified by PartsTable
Verbatim · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Store n Go USB 3.0 USB Drive offers extreme transfer speed, large capacity, and plug n play operation. The device is 100% compatible with USB 2.0.<br>For optimum performance the drive must be connected to a USB 3.0 host controller (USB 3.0 port). Push & pull enclosure design protects the USB interface.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-286-6870, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
43895
NSN: 5330-00-286-6870
FSC: 5330
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
air_flow_rate2.5 CUBIC FEET PER MINUTE MINIMUM AND 40.0 CUBIC FEET PER MINUTE MAXIMUM
bowl_capacity0.375 PINTS
bowl_materialALUMINUM
overall_width2.890 INCHES MINIMUM AND 3.150 INCHES MAXIMUM IN
overall_height9.070 INCHES NOMINAL IN
features_providedBOWL GUARD AND OIL FEED CONTROL AND MANUAL DRAIN
housing_bore_diameter3.2495 INCHES MINIMUM AND 3.2525 INCHES MAXIMUM IN
sealing_element_styleANGULAR
lubrication_spray_typeFOG
NSN5330-00-286-6870
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 43895 MFR: Verbatim ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
ACCOMMODATED SHAFT DIAMETER: 1.625 INCHES NOMINAL IN
HOUSING BORE DIAMETER: 3.2495 INCHES MINIMUM AND 3.2525 INCHES MAXIMUM IN
MATERIAL: LEATHER AND RUBBER SYNTHETIC OVERALL
SEAL WIDTH: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
SEALING ELEMENT STYLE: ANGULAR
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER1.625 INCHES NOMINAL IN
HOUSING BORE DIAMETER3.2495 INCHES MINIMUM AND 3.2525 INCHES MAXIMUM IN
MATERIALLEATHER AND RUBBER SYNTHETIC OVERALL
SEAL WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
CASE STYLESQUARE
MATERIALSTEEL CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
84476Interchangeable
interchangeable cross-reference
interchangeable
21616Interchangeable
interchangeable cross-reference
interchangeable
D21616Interchangeable
interchangeable cross-reference
interchangeable
2150700Interchangeable
interchangeable cross-reference
interchangeable
49431Interchangeable
interchangeable cross-reference
interchangeable
366816-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 43895?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 43895?
43895 is a TRANSFORMER,POWER manufactured by Verbatim.
What parts can replace 43895?
There are 21 known substitutes for 43895: 84476, 21616, D21616 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 43895?
43895 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-286-6870. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 43895