PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4382 PIECE 12
4382 PIECE 12 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C OVERALL, shank_length: 0.250 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 0.388 INCHES NOMINAL IN, overall_length: 2.935 INCHES NOMINAL IN, surface_finish: 20.0 MICROINCHES SHOULDER END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-136-7505, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4382 PIECE 12
NSN: 5315-01-136-7505
FSC: 5315
CAGE: 89256 — NAVAL SHIP ENGINEERING CENTER PHILADELPHIA DIV (USA)
SPECIFICATIONS
materialSTEEL COMP 440C OVERALL
shank_length0.250 INCHES NOMINAL IN
thread_class2A A
thread_length0.388 INCHES NOMINAL IN
overall_length2.935 INCHES NOMINAL IN
surface_finish20.0 MICROINCHES SHOULDER END
undercut_width0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
first_end_styleSQUARE
hardness_rating58.0 ROCKWELL C MINIMUM OVERALL
special_features0.375 IN. W SQUARE END IN
thread_directionRIGHT-HAND
shoulder_diameter0.844 INCHES NOMINAL IN
NSN5315-01-136-7505
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4382 PIECE 12 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
SHOULDER DIAMETER: 0.844 INCHES NOMINAL IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE II
•
FIRST END STYLE: SQUARE
•
SURFACE FINISH: 20.0 MICROINCHES SHOULDER END
•
HARDNESS RATING: 58.0 ROCKWELL C MINIMUM OVERALL
•
SECOND SHANK DIAMETER: 0.343 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNEF
TECHNICAL CHARACTERISTICS (FLIS)
HOLE ARRANGEMENT STYLEONE END DRILLED
SHOULDER DIAMETER0.844 INCHES NOMINAL IN
INTERNAL DRIVE STYLECROSS RECESS TYPE II
FIRST END STYLESQUARE
SURFACE FINISH20.0 MICROINCHES SHOULDER END
HARDNESS RATING58.0 ROCKWELL C MINIMUM OVERALL
SECOND SHANK DIAMETER0.343 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNEF
SPECIAL FEATURES0.375 IN. W SQUARE END IN
NOMINAL THREAD SIZE0.688 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
421301-1Interchangeable
interchangeable cross-reference
interchangeable
421301Interchangeable
interchangeable cross-reference
interchangeable
5920PL0647905Interchangeable
interchangeable cross-reference
interchangeable
S222002Interchangeable
interchangeable cross-reference
interchangeable
GE8421-3Interchangeable
interchangeable cross-reference
interchangeable
AN121504Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4382 PIECE 12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4382 PIECE 12?
4382 PIECE 12 is a PIN,SHOULDER,HEADLESS.
What parts can replace 4382 PIECE 12?
There are 21 known substitutes for 4382 PIECE 12: 421301-1, 421301, 5920PL0647905 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4382 PIECE 12?
4382 PIECE 12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-136-7505. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4382 PIECE 12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026