PartsTable
Technical Data Sheet
Download PDF

4371503-6 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

4371503-6: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.628 INCHES NOMINAL IN, hole_diameter: 1.280 INCHES NOMINAL IN, overall_diameter: 2.625 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-898-1476, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4371503-6
NSN: 5310-00-898-1476
FSC: 5310 — Nuts and Washers
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.628 INCHES NOMINAL IN
hole_diameter1.280 INCHES NOMINAL IN
overall_diameter2.625 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleBLANK RECTANGULAR
outside_left_corner_chamfer_angle45.0 DEGREES NOMINAL
NSN5310-00-898-1476
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4371503-6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE LEFT CORNER CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
OVERALL DIAMETER: 2.625 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: BLANK RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 1.280 INCHES NOMINAL IN
•
THICKNESS: 0.628 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OUTSIDE LEFT CORNER CHAMFER ANGLE45.0 DEGREES NOMINAL
OVERALL DIAMETER2.625 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEBLANK RECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER1.280 INCHES NOMINAL IN
THICKNESS0.628 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
4371503Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 4371503-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4371503-6?
4371503-6 is a WASHER,FLAT.
What parts can replace 4371503-6?
There is 1 known substitute for 4371503-6: 4371503. Substitute compatibility should be verified for your specific system.
What is the NSN for 4371503-6?
4371503-6 is cataloged in the U.S. Government catalog under NSN 5310-00-898-1476. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4371503-6