PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4369422
4369422 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SEALING ELEMENT, case_style: RECESSED, seal_width: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, housing_bore_diameter: 1.561 INCHES NOMINAL IN, sealing_element_style: VERTICAL, accommodated_shaft_diameter: 1.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-691-7202, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4369422
NSN: 5330-00-691-7202
FSC: 5330
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
materialRUBBER SEALING ELEMENT
case_styleRECESSED
seal_width0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
housing_bore_diameter1.561 INCHES NOMINAL IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter1.125 INCHES NOMINAL IN
NSN5330-00-691-7202
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4369422 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 1.561 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL
•
MATERIAL: RUBBER SEALING ELEMENT
•
CASE STYLE: RECESSED
•
ACCOMMODATED SHAFT DIAMETER: 1.125 INCHES NOMINAL IN
•
SEAL WIDTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER1.561 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL
MATERIALRUBBER SEALING ELEMENT
CASE STYLERECESSED
ACCOMMODATED SHAFT DIAMETER1.125 INCHES NOMINAL IN
SEAL WIDTH0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
10271Interchangeable
interchangeable cross-reference
interchangeable
SS-1220-12Interchangeable
interchangeable cross-reference
interchangeable
AA630-12Interchangeable
interchangeable cross-reference
interchangeable
CB2MXX-10XInterchangeable
interchangeable cross-reference
interchangeable
SM-D-447805Interchangeable
interchangeable cross-reference
interchangeable
4607902Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4369422?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4369422?
4369422 is a SEAL,PLAIN ENCASED.
What parts can replace 4369422?
There are 9 known substitutes for 4369422: 10271, SS-1220-12, AA630-12 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4369422?
4369422 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-691-7202. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4369422

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026