PartsTable
Technical Data Sheet
43615 ✓ Verified by PartsTable
Verbatim · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The advent of Blu-ray technology has led to the introduction of high capacity storage discs to meet the demand cause by the rapid growth of high definition television (HDTV).<br><br>Blu-ray discs get their name from blue laser technology. The shorter wavelength of the laser is the reason it is blue in colour. The blue laser has a wavelength of 405nm compared with the wavelength of 650nm for DVD which utilises red laser technology.

The benefit of having a blue laser with a shorter wavelength means it is possible to write smaller data pits and therefore vastly increase the amount of data on the disc.<br><br>Blu-ray discs offer 3 to 5 times the storage capacity of a standard recordable DVD disc, enabling the recording, rewriting and playback of high definition video (HD). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-1343, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 43615
NSN: 5310-00-167-1343
FSC: 5310
CAGE: 99167 — HAMILTON SUNDSTRAND CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_style90 DEGREE PARALLEL
nut_styleHEXAGON
nut_height0.141 INCHES NOMINAL IN
ring_styleSTRAIGHT GAP
shank_styleTAPER-SQUARE
thread_class3B
twist_length4.250 INCHES NOMINAL IN
usage_designEXTERNAL
thread_seriesUNF
overall_length8.875 INCHES NOMINAL IN
hardness_rating40.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
NSN5310-00-167-1343
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 43615 · Verbatim ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
NOMINAL THREAD SIZE: 0.190 INCHES IN
THREAD QUANTITY PER INCH: 32
THREAD SERIES: UNF
WIDTH ACROSS FLATS: 0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
BEARING SURFACE TYPE: WASHER FACED
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD SIZE0.190 INCHES IN
THREAD QUANTITY PER INCH32
THREAD SERIESUNF
WIDTH ACROSS FLATS0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3B
THREAD DIRECTIONRIGHT-HAND
BEARING SURFACE TYPEWASHER FACED
MATERIALSTEEL OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
2-436Interchangeable
interchangeable cross-reference
interchangeable
SCD2556-16Interchangeable
interchangeable cross-reference
interchangeable
214174Interchangeable
interchangeable cross-reference
interchangeable
R927Interchangeable
interchangeable cross-reference
interchangeable
28311Interchangeable
interchangeable cross-reference
interchangeable
C56353-18Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 43615?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 43615?
43615 is a CHISEL,MORTISING,HOLLOW manufactured by Verbatim. It is classified as a MRO (MRO_GENERAL).
What parts can replace 43615?
There are 21 known substitutes for 43615: 2-436, SCD2556-16, 214174 and 18 more. Substitute compatibility should be verified for your specific system.
Is 43615 still available?
43615 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 43615