PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 43606J
43606J ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include bore_shape: STRAIGHT, overall_width: 1.1875 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND, style_designator: NON-LOADING GROOVE, NON-SEPARABLE CARTRIDGE TYPE, features_provided: SNAP RING-GROOVE MOUNTING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5029, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
43606J
NSN: 3110-00-156-5029
FSC: 3110
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
bore_shapeSTRAIGHT
overall_width1.1875 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE CARTRIDGE TYPE
features_providedSNAP RING-GROOVE MOUNTING
lubrication_materialGREASE
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
lubrication_material_document_and_classificationMIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-156-5029
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 43606J · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
•
LOAD DIRECTION: RADIAL
•
BORE SHAPE: STRAIGHT
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE CARTRIDGE TYPE
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.1875 INCHES NOMINAL IN
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
LOAD DIRECTIONRADIAL
BORE SHAPESTRAIGHT
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE CARTRIDGE TYPE
LUBRICATION MATERIALGREASE
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
FEATURES PROVIDEDSNAP RING-GROOVE MOUNTING
STANDARD TOLERANCE DESIGNATIONABEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
K169Interchangeable
interchangeable cross-reference
interchangeable
MX 431-1LInterchangeable
interchangeable cross-reference
interchangeable
K169AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 43606J?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 43606J?
43606J is a BEARING,BALL,ANNULAR.
What parts can replace 43606J?
There are 3 known substitutes for 43606J: K169, MX 431-1L, K169A. Substitute compatibility should be verified for your specific system.
What is the NSN for 43606J?
43606J is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5029. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 43606J

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026