PartsTable
Technical Data Sheet
PartsTable / MRO / 436-5
436-5 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, base_style: MIDGET FLANGED, bulb_style: T (TUBULAR), head_style: FILLISTER, body_length: 0.562 INCHES MAXIMUM IN, head_height: 0.144 INCHES MINIMUM AND 0.154 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-141-2817, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 436-5
NSN: 5305-00-141-2817
FSC: 5305
CAGE: 96046 — CRANE PUMPS & SYSTEMS PFT CORP DIV CRANE PUMPS & SYSTEM PFT CORP. (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
base_styleMIDGET FLANGED
bulb_styleT (TUBULAR)
head_styleFILLISTER
body_length0.562 INCHES MAXIMUM IN
head_height0.144 INCHES MINIMUM AND 0.154 INCHES MAXIMUM IN
temp_rating275.0 FAHRENHEIT DEGF
thread_class2A A
body_diameter0.234 INCHES MAXIMUM IN
cubic_measure0.025 CUBIC INCHES
head_diameter0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
hole_diameter0.046 INCHES NOMINAL IN
NSN5305-00-141-2817
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 436-5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
•
HEAD HOLE CONFIGURATION STYLE: ROUND
•
SCREW MATERIAL: STEEL
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5061 ASSN STD SINGLE MATERIAL RESPONSE
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE
•
INTERNAL DRIVE STYLE: SLOT
•
THREAD QUANTITY PER INCH: 32
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
THREAD CLASS2A A
HEAD HOLE CONFIGURATION STYLEROUND
SCREW MATERIALSTEEL
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5061 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS 2400 ASSN STD SINGLE TREATMENT RESPONSE
INTERNAL DRIVE STYLESLOT
THREAD QUANTITY PER INCH32
SCREW SURFACE TREATMENTCADMIUM
HEAD HEIGHT0.144 INCHES MINIMUM AND 0.154 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
436-5REVBInterchangeable
interchangeable cross-reference
interchangeable
436-5Interchangeable
interchangeable cross-reference
interchangeable
716A54F15JInterchangeable
interchangeable cross-reference
interchangeable
313-001-010Interchangeable
interchangeable cross-reference
interchangeable
C7AInterchangeable
interchangeable cross-reference
interchangeable
40082127Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 436-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 436-5?
436-5 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 436-5?
There are 12 known substitutes for 436-5: 436-5REVB, 436-5, 716A54F15J and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 436-5?
436-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-141-2817. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 436-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026