PartsTable
Technical Data Sheet
Download PDF

436-15 — CHISEL,MORTISING,HOLLOW

✓ Government record, cited
Verbatim · MRO · MRO_GENERAL
PRODUCT OVERVIEW

436-15: CHISEL,MORTISING,HOLLOW.

The advent of Blu-ray technology has led to the introduction of high capacity storage discs to meet the demand cause by the rapid growth of high definition television (HDTV). Blu-ray discs get their name from blue laser technology. The shorter wavelength of the laser is the reason it is blue in colour.

The blue laser has a wavelength of 405nm compared with the wavelength of 650nm for DVD which utilises red laser technology. The benefit of having a blue laser with a shorter wavelength means it is possible to write smaller data pits and therefore vastly increase the amount of data on the disc. Blu-ray discs offer 3 to 5 times the storage capacity of a standard recordable DVD disc, enabling the recording, rewriting and playback of high definition video (HD).

This part is cataloged in the U.S. Government catalog under NSN 5310-00-167-1343, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 436-15
NSN: 5310-00-167-1343
NIINs: 001671343, 002816716, 002932904, 006086408
FSC: 5310 — Nuts and Washers
CAGE: 99167 — HAMILTON SUNDSTRAND CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_style90 DEGREE PARALLEL
nut_styleHEXAGON
nut_height0.141 INCHES NOMINAL IN
ring_styleSTRAIGHT GAP
shank_styleTAPER-SQUARE
thread_class3B
twist_length4.250 INCHES NOMINAL IN
usage_designEXTERNAL
thread_seriesUNF
overall_length8.875 INCHES NOMINAL IN
hardness_rating40.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
NSN5310-00-167-1343
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 436-15 · Verbatim ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE
•
NUT HEIGHT: 0.141 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NONDEFINITIVE SPEC/STD DATA2 TYPE
NUT HEIGHT0.141 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
COUNTERSINK ANGLE110.0 DEGREES NOMINAL NUT
NUT STYLEHEXAGON
SUBSTITUTES & CROSS-REFERENCES 9
6026-3147-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN315-3RReference document
Same NSN cross-reference
Reference document — Secondary reference
2211186Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FF-N-836Reference document
Same NSN cross-reference
Reference document — Identification reference
7525Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2436Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 436-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 436-15?
436-15 is a CHISEL,MORTISING,HOLLOW manufactured by Verbatim. It is classified as a MRO (MRO_GENERAL).
What parts can replace 436-15?
There are 9 known substitutes for 436-15: 6026-3147-3, AN315-3R, 2211186 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 436-15?
436-15 is cataloged in the U.S. Government catalog under NSN 5310-00-167-1343. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 436-15