PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4350615
4350615 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.563 INCHES NOMINAL IN, overall_length: 5.000 INCHES NOMINAL IN, outside_corner_radius: 0.500 INCHES NOMINAL IN, cross-sectional_thickness: 0.063 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-179-8238, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4350615
NSN: 5330-00-179-8238
FSC: 5330
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.563 INCHES NOMINAL IN
overall_length5.000 INCHES NOMINAL IN
outside_corner_radius0.500 INCHES NOMINAL IN
cross-sectional_thickness0.063 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
center_to_center_distance_between_bolt_holes_along_width2.563 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length4.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-179-8238
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4350615 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.063 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE CORNER RADIUS: 0.500 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 4.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 2.563 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.063 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH3.563 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.500 INCHES NOMINAL IN
OVERALL LENGTH5.000 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH4.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH2.563 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
25715Interchangeable
interchangeable cross-reference
interchangeable
H3-079-05-0001Interchangeable
interchangeable cross-reference
interchangeable
25715AInterchangeable
interchangeable cross-reference
interchangeable
1820-0099Interchangeable
interchangeable cross-reference
interchangeable
SN7493NInterchangeable
interchangeable cross-reference
interchangeable
10362Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4350615?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4350615?
4350615 is a GASKET.
What parts can replace 4350615?
There are 12 known substitutes for 4350615: 25715, H3-079-05-0001, 25715A and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4350615?
4350615 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-179-8238. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4350615

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026