PartsTable
Technical Data Sheet
43487 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

OSCILLATOR,NONCRYSTAL CONTROLLED. Key specifications include hub_type: LUER LOCK, material: STEEL COMP 304 CANNULA, thickness: 0.038 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN, hole_diameter: 0.280 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN, overall_width: 1.375 INCHES NOMINAL IN, cannula_length: 0.703 INCHES MINIMUM AND 0.797 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-133-3969, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
43487
NSN: 5330-00-133-3969
FSC: 5330
CAGE: 96132 — WALWORTH CO THE
SPECIFICATIONS
hub_typeLUER LOCK
materialSTEEL COMP 304 CANNULA
thickness0.038 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
hole_diameter0.280 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
overall_width1.375 INCHES NOMINAL IN
cannula_length0.703 INCHES MINIMUM AND 0.797 INCHES MAXIMUM IN
inclosure_typeENCASED
overall_height0.875 INCHES NOMINAL IN
overall_length1.970 INCHES NOMINAL IN
connection_typeSOLDER LUG BOTTOM
overall_diameter0.545 INCHES MINIMUM AND 0.555 INCHES MAXIMUM IN
special_featuresD-DAY ITEM FOR DOD
NSN5330-00-133-3969
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 43487 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
43487Interchangeable
interchangeable cross-reference
interchangeable
A49609Interchangeable
interchangeable cross-reference
interchangeable
6194735Interchangeable
interchangeable cross-reference
interchangeable
8881250289Interchangeable
interchangeable cross-reference
interchangeable
305143Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 43487?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 43487?
43487 is a OSCILLATOR,NONCRYSTAL CONTROLLED.
What parts can replace 43487?
There are 5 known substitutes for 43487: 43487, A49609, 6194735 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 43487?
43487 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-133-3969. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 43487