PartsTable
Technical Data Sheet
Download PDF

4337695 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4337695: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include first_leg_style: CORNER RADIUS, first_leg_width: 3.170 INCHES NOMINAL IN, first_leg_length: 3.000 INCHES NOMINAL IN, style_designator: DOUBLE ANGLE, second_leg_length: 1.240 INCHES NOMINAL IN, surface_treatment: CHROMATE AND CARC (CHEMICAL AGENT RESISTANT COATING). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-699-8777, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4337695
NSN: 5340-01-699-8777
FSC: 5340 — Hardware, Commercial
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
first_leg_styleCORNER RADIUS
first_leg_width3.170 INCHES NOMINAL IN
first_leg_length3.000 INCHES NOMINAL IN
style_designatorDOUBLE ANGLE
second_leg_length1.240 INCHES NOMINAL IN
surface_treatmentCHROMATE AND CARC (CHEMICAL AGENT RESISTANT COATING)
first_leg_thickness0.125 INCHES NOMINAL IN
center_section_width9.000 INCHES NOMINAL IN
second_leg_thickness0.125 INCHES NOMINAL IN
center_section_height1.880 INCHES NOMINAL IN
end_item_identification4210-01-622-0440
first_leg_corner_radius0.500 INCHES NOMINAL IN
NSN5340-01-699-8777
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4337695 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 1.810 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 1.380 INCHES NOMINAL IN
•
CENTER SECTION THICKNESS: 0.125 INCHES NOMINAL IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 2.000 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: F-100:C40,TYPEII,+20,TYPEVI,+30,TYPEVI,CARC GREEN MFR REF SINGLE TREATMENT RESPONSE
•
FIRST LEG CORNER RADIUS: 0.500 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 1.240 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH1.810 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER1.380 INCHES NOMINAL IN
CENTER SECTION THICKNESS0.125 INCHES NOMINAL IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH2.000 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONF-100:C40,TYPEII,+20,TYPEVI,+30,TYPEVI,CARC GREEN MFR REF SINGLE TREATMENT RESPONSE
FIRST LEG CORNER RADIUS0.500 INCHES NOMINAL IN
SECOND LEG LENGTH1.240 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
CENTER SECTION WIDTH9.000 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4337695?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4337695?
4337695 is a BRACKET,DOUBLE ANGLE.
What is the NSN for 4337695?
4337695 is cataloged in the U.S. Government catalog under NSN 5340-01-699-8777. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4337695

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.